Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="khoyos" data-source="post: 3243019" data-attributes="member: 711">i used exedy 3 puck semi race. never had any problems before. last time tagged along transit trackday, longest i ran was 15laps without any stop - it was dark n i couldnt find the pit entrance hehe. did not slip at all even after 15th lap.leave ur engine in current specs n upgrade ur suspension to adjustables. make full use of the stock engine. make sure engine is the last thing u mod (to increase horsepower that is, if it is to increase reliability then go ahead). the paramount thing is the brakes, then suspension. after a few trackdays, ur front rotors will warp (weakness of twinpot rotor in trackday cars) so u will be looking at some aftermarket options. i used project mju rotors to replace the dying stock rotors. by far the best ever braking upgrade i did to my car. after rotor upgrade, made me much much more confident in my car (both on the street n in track). u can use dixcel rotors also. greenstuff pads resulted in some good, some bad experiences. if u think its ok, then stick with it. i did not have good experience with greenstuff. the best suspension for track is something u can set according to ur comfort level to the car (how the car reacts) in the track. not some chop shop absorbers that is too hard making the car hard to control (too hard at the front - understeer, too hard at the back - easy to spin). i sat in many cars running chop shop absorbers, even at the softest setting, its too hard n bouncy melantun2. ur driving down to sepang from north, before u reach sepang, all ur breakfast will be gone at roadside when u vomit cos suspension too hard hehe... try to get something that is a compromise - between daily driving on SUPERB n EXCELLENT malaysian road, n circuit driving. i found my best setup with the help of titan. not too bad on the road, not too bad in circuit.</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TE37SL Black Edition...
- Started by david tao
- Chassis and Wheels
Honda city JSracing gtwing spoiler
- Started by jeff6126
- Exterior and Body
Honda civic fd ~car spray(Ferrari red)
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front skirt lip with glossy black
- Started by jeff6126
- Exterior and Body
Kia Forte gtwing spoiler
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Proton Saga VVT Evo Front Bonnet Hood
- Started by jeff6126
- Exterior and Body
Perodua bezza gear up body kit/spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front bumper set ~M5 kidney grille...
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Video: MCKEE GTR+Supercar Drag Segment - TIMETOATTACK Round 1 May 20th 2012

http://www.timetoattack.net/wp-content/uploads/2012/05/Screen-Shot-2012-05-26-at-1.11.49-AM-600x375.png

If you didn't make it for the last TIMETOATTACK Round 1 2012 on May 20th last Sunday, here is a glimpse of what...

WTFind Borbet Type A 16x9jj (4lugs PCD100)

Hello guys,

Where can I find Borbet Type A 16x9jj rims front and rear (4 lugs PCD100),Doesn't mind if its new or in used condition.

Please let me know if someone know,prefer Johor area.

Thank you so much.

Where in JB is a good reliable to shop to do BOT?

Anyone knows? is heng lai auto at pelangi reliable and good enough?