Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="edgar_raphael" data-source="post: 1844006" data-attributes="member: 463">yes supraman, I think you've got my points now. So ok, to people who still don't quite get it, the biggest limitation when modding a 2JZ lies in the twin turbos setup, particularly, it's small single wastegate.Easy upgrades such as boost controller, aftermarket exhaust and open pod intake will make the engine response to increase dramatically, but to an extent when the wastegate runs out of its efficiency then the next level of modifications will involves a lot of money.The nevel level will involves a replacement turbos with a proper wastegates. I've seen many perfect examples of 2JZ works here, the best hidden power of Supra lies at the exhaust side.For your information, the exhaust gas flow for the 2JZ is so highly inefficient for stock configurations where often, even when you replaced the turbo with a single operation unit with an external wastegates, some owners still face the problems with the wastegate feed collector not efficient enough for that sort of levels.More than often, you will need a proper fabricated and tuned length and width for your manifold, more important than anything else I would say, then only then the true potential of the 2JZ will be significant.A simple external wastegate job, plus a good exhaust system with an increased boost, will show an healthy easy increase of 30kW or more, and this has been proven.The stock bottom block of the engine everything from piston to conrods to cranks are bulletproof enough to sustain power figures of up to 500bhp, only when you are seriously chasing higher power figure, then should you consider a bottom end rebuild.</blockquote>

Verification

The Marketplace Latest

MITSUBISHI / FE658 (RB/BK S2S)
- Started by PIstonHeads
- Chassis and Wheels
Perodua Alza gear up body kit
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
Honda city Mugen gtwing spoiler
- Started by jeff6126
- Exterior and Body
Honda Civic FD JSracing GTwing spoiler
- Started by jeff6126
- Exterior and Body
Honda civic FC varis GTwing spoiler
- Started by jeff6126
- Exterior and Body
JSracing GTwing spoiler
- Started by jeff6126
- Exterior and Body
Proton saga drive68 bodykit
- Started by jeff6126
- Exterior and Body
Perodua Bezza projectR body kit
- Started by jeff6126
- Exterior and Body
Honda city gm6 drive68 body kit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Toyo R1R vs Federal 595 RS-R (Any Comment?)

Hi guys,

Now I am confusing on which tires to choose between Toyo R1R vs Federal 595 RS-R.

One from Made in Japan & one Made in Taiwan.

Both thread wear also 140.

Looking for 195/50/15 for Sepang track use...

Northern mitsubishi showroom launch gathering

Calling all Northern Mitsubishi Evo & Lancer owners....

We have been invited to attend the launch of Alor Setar Mitsubishi showroom opening. It will be officially opened by the MMM CEO. Company name is JM...

Possible Wheel Falling Off : Honda Civic