Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="AccordR" data-source="post: 929175" data-attributes="member: 456">We have many models of GT Wing coming in from Japan next month (November). They include :-Cusco Style GT Wings (w:1600mm x h:315mm) - Recommended for Big sport cars http://img7.picsplace.to/img7/1/Cusco-ht.jpgSTi S202 Style GT Wings (w:1400mm x h:110mm) - Recommended for all carshttp://img7.picsplace.to/img7/1/STi.JPG RE Amemiya Style GT Wings with Carbon Fiber Mounting Plate(w:1480mm) - Recommeded for RX8http://img7.picsplace.to/img7/1/RE_Amemiya.jpg http://img7.picsplace.to/img7/1/1392.jpg RaceCraft 3D GT Wings with Carbon Fiber Mounting Plate(w:1460mm) - Recommended for all carshttp://img7.picsplace.to/img7/1/RC.jpg Mugen Style GT Wings with Carbon Fiber Mounting Plate(w:1380mm) - Recommeded for all cars especially DC5 & Civic EShttp://img7.picsplace.to/img7/1/Mugen.jpg AC Schnitzer Style GT Wings (w:1100mm) - Recommended for all cars especially BMW 3 serieshttp://img7.picsplace.to/img7/1/DSCF0302_1.jpg All items are imported from Japan. They are made in PURE carbon fiber, not like those Taiwanese wings which are either half carbon fiber - which means only the top is carbon fiber, the bottom is fiberglass, or wrapovers, meaning they are actually fiberglass GT wings but wrapped with 1 layer of carbon fiber. Taiwanese wings are normally much heavier. And the worst part is that their brackets are riverted directly into the fiberglass at the bottom of the wing, where ours have aluminium plates incorporated in the wing itself during production to ensure that the wing will be stable and do not fly off at high speed, which tends to happen to Taiwanese wings.There will be 2 grades of GT Wings coming in, Grade A & B.Grade A are those of perfect finishing.Price range :- RM1600 - RM2800Grade B are those of slightly imperfect finishing, like the carbon weave is not straight. But no other defects to Grade B, only the carbon weave will have some slight defects here and there.Price range :- RM1300 - RM2500Regards,Shedden</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

New Lamborghini

A new Lamborghini will be revealed at the Frankfurt Motorshow on 13th September 2011. There's a buzz of excitement...

[WTB] RB26 engine

Want to buy RB26..
Budget below RM10k..
Also interested with RB25 full-tuned engine..
Kindly pls contact 013-2072789...
Tq..

Hks Sld Type Ii

HKS SLD TYPE II
Used
RM550
Suitable for Altezza Automatic Transmission
Go beyond 180kmph
Reason to sell: Changing To Manual
email me: nikosan[at]doridoriautoparts.com

thanks