Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="FVel" data-source="post: 1063491142" data-attributes="member: 48425">Explain to me the logic of submerging an entire damaged reactor complex in water and then attempting to send personnel and equipment into the irradiated liquid to attempt a restabilization. You want a deep dive salvage operation into a pool of radiactive water ? How long are you expecting the dive to take during ingress and egress ? What are the time alloted to work in this environment ? is it even feasible ? During an emergency, how quickly do you expect personnel to surface ? What about the dangers of the decompression 'bends' to personnel if there is no option for them to slow their rate of surfacing ? How stable is the entire submerged structure. Assuming the submersible equipment of the reactor is damaged...say in an explosion.....how stable then would your sturcture be in a submerged mode ? If the bilgeheads are compromised and if it capsizes or tilts underwater, how will that affect salvage ?How are you going to keep a containement structure this large from maintaining it's physical integrity over the multiple generations it takes for radioactive half-lives to reduce themselves to a safe level ? As for complete entombment, it has been tried before with the sarcophagus at Chernobyl. They have years to do it and for years they keep doing it. To this day, it is a nightmare to maintain. If they cannot do it on a smaller scale with the large containment tanks at Hanford, what makes you think they will do it with your behemoth ? Actually, do you even know what I'm referring to when I mentioned 'Hanford' ? Have you actually studied the engineering behind Hanford ? nevermind...I guess you don't know I am talking about.What exactly do you mean by "Semi confine system that build from various radioactive resistance, reinforcement material and water leak prevention material" ? Can you be more specific on what exactly is a 'radioactive resistance' material ? By that, I mean you tell me the name of this material.</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing CE28 16x7jj...
- Started by david tao
- Chassis and Wheels
Honda CITY 1.5 E (A)
- Started by PIstonHeads
- Cars for sale
original BBS RE013 18x8jj offset +50 5H pcd 5x112...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG3 18x8 18x8.5...
- Started by david tao
- Chassis and Wheels
original Endless M4 S2 4pot 2pot brake caliper set...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG2 17x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare WedsSport TC005 17x7jj offset +40 5H...
- Started by david tao
- Chassis and Wheels
Vifa Speakers Audison Amp
- Started by samuel118
- ICE -In Car Entertainment
original rare Yokohama ADVAN Racing RG3 18x8.5...
- Started by david tao
- Chassis and Wheels
Carbing R35 GTR GTR35 Brake Master Cylinder Stopper
- Started by aycy
- Engine and Performance

Posts refresh every 5 minutes

Morgan puts the sex appeal back in goggles with its Threewheeler w/video

https://www.zerotohundred.com/wp-content/uploads/2011/06/morgan-600x432.jpg

What has three wheels, 115hp bike engine, a five speed manual gearbox and goggles for the driver? If you guessed the Reliant Robin, then...

2wd to 4wd@Awd

hello guys...i'm thinking to get a lancer mx(thinking only...hehe)that have been converted to evo6 engine...but...its 2wd...where can convert it to 4wd??how much it gonna cost and is it legal??

cheers...

fuel saver-air compressor for sale

Second hand fuel saver-air compressor for sale. Still in good condition, 70% new.

Previously installed in my Kenari, can reach 600km per tank(40liter) in normal driving attitude.

If...