Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="aeonic" data-source="post: 1665459" data-attributes="member: 6618">i changed to this clutch and my car is hard to drive now because of the vibration after you release the clutch, it makes the car jerk and loud noises like things gripping/hitting the car.Is this the characteristic of the clutch ? hard to drive and hard to balance the clutch as it will jerk and make noise, frustrated when jam. any advice?</blockquote>

Verification

The Marketplace Latest

original rare Yokohama ADVAN Racing RG3 18x8 18x8.5...
- Started by david tao
- Chassis and Wheels
original Endless M4 S2 4pot 2pot brake caliper set...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG2 17x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare WedsSport TC005 17x7jj offset +40 5H...
- Started by david tao
- Chassis and Wheels
Vifa Speakers Audison Amp
- Started by samuel118
- ICE -In Car Entertainment
original rare Yokohama ADVAN Racing RG3 18x8.5...
- Started by david tao
- Chassis and Wheels
Carbing R35 GTR GTR35 Brake Master Cylinder Stopper
- Started by aycy
- Engine and Performance
GR Corolla Hypertune Bolt On Intercooler
- Started by aycy
- Engine and Performance
Carbing Radiator Reservoir Tank Honda Civic Type R FL5
- Started by aycy
- Engine and Performance
R35 GTR GTR35 Rim Wheel TE37 Track Edition
- Started by aycy
- Chassis and Wheels

Posts refresh every 5 minutes

Wheel balancing for Citroen c3

Hi, any c3 owner here? Just wondering which tyre shop in PJ area has the adapter to do wheel balancing on the original c3 rims?

HCOTD: One Loaded Toyota Altezza with a 1JZ Turbo VVTi

'(00): This is one loaded Altezza. Packed with a parts list even Taniguchi would be proud to drift with. Firstly, based on a 1JZ conversion, it's then treated to a 2JZ block, and then fully balanced with parts like...

F1-Two cases of industrial espionage