Opti-Coat™Pro : Toyota Altis

s1tl

1,000 RPM
Senior Member
Joined
Jul 13, 2010
Messages
1,237
Points
713
Location
Ipoh/KL

We have with us a brand new Toyota Altis ready to be protected. When we say brand new, we usually mean 1 week or 2 weeks from delivery but this car is way beyond new. The owner just collected and drove the car home 2hours ago. The owner contacted us before delivery to schedule the timing and here we are. Check out the process!
exterior-surface-prep.jpg

Upon arrival, the owner already pre-parked the car in a horizontal position which is easier for us to work around.
2016-08-26-12-48-49.jpg

We did our routine walk around to inspect for obvious damages.
2016-08-26-12-49-01.jpg

Looks like the owner did some wiping and left some smudge marks.
2016-08-26-12-49-23.jpg

Overall the paint looks pretty much new since the owner just collected the car hours ago.
2016-08-26-12-51-32.jpg

Pop the fuel area and even for such a new car, it is dirty.
2016-08-26-12-52-42.jpg

The dirt splashed from the journey home.
2016-08-26-12-53-49.jpg

The windscreen were a little dusty as well.
2016-08-26-12-54-19.jpg

Since its a new car, we expected watermark issues on the windscreen but it was clean and clear.
2016-08-26-13-41-51.jpg

As we inspected the paint further, we spotted some hologram issues.
2016-08-26-14-03-54.jpg

Another view of the hologram issues.
2016-08-26-14-04-19.jpg

On LED, the hologram became even more obvious.
2016-08-26-14-06-43.jpg

On a different area.
2016-08-26-14-06-50.jpg

More hologram marks.


Coming to the paint correction, we did a light polish to remove the hologram.
2016-08-26-14-08-28.jpg

Another pass of polish just in case if there were any micro swirls.
2016-08-26-14-11-56.jpg

Leaving a perfect flawless surface. Of course, we did the essential cleaning and surface preparations for the coating.


The wheels were just slightly dirty as its the monsoon season.

With only minor stains and brake dust.
2016-08-26-12-53-44.jpg

Wheels cleaned and Opti-Coated.


The preparation process did not take up alot of time because the car was pretty much new, we only fixed any existing damages, gave a light polish, and it was ready to be coated. Check out the final finishing.


 

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience