Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="MizuChi" data-source="post: 927745" data-attributes="member: 2628">Firstly, find out the source of the problem. Why is it chipping? Cheap paint? I haven't had the chance to paint a bumper yet, but I have painted a spoiler, and the process is probably similar, if not the same.1. Sandpaper. If there are no cracks or bad scratches, #450 will do just fine.2. Cover scratches and cracks with putty. Leave to dry then sandpaper it until it's smooth.3. Sandpaper some more. After #450, get some #600, and then #800. I forgot to mention, you'll have to use wet sandpaper, meaning not the usual sandpaper you use for woodwork, but the ones you can use on wet surfaces. The sandpaper process will also require you to use water, and keep the surface wet.4. After all the sandpapering done. Time to paint. If you're using can spray, then it's pretty much straight forward. Other than that, I'm not sure.5. Spray one light layer after another until you can't see the old colour/putty/etc anymore. Let one layer dry up before doing the next.6. After you're done with the spraying process, get some #1000~#1200 sandpaper, and do some more wet sandpapering.7. Final and most crucial step is the finishing. I use a #3000 liquid finishing. You can use it with a buff, or you can do it by hand, whichever is easiest. Slow circular motion. Do it until you get some good reflection effect, or until you're satisfied.It takes a lot of patience to do this properly. If you're patience is like a 0.1A fuse, then you're better off sending it to a shop. Good luck.p/s: I've never used 2K, so I don't know how to use them.</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

ATR power window problem

hi! Bro

my power window (front passenger site) recently get crazy, some time operate normal.
now no event can move.

please advice any ideal to reset the power window.

thank you

Own a brand new Nissan from as low as 0.88% per annum

https://www.zerotohundred.com/wp-content/uploads/2011/07/nis11-600x210.jpg

If you’re in the market for a Nissan offering but haven’t been able to find one at the right price, now may very well be the time to finally...

WTB: R34 GTR ori front bumper

is there any taiko selling??? pls call me or sms me if u have one...
THank you!!! :biggrin: