Pivot Megaraizin readings

[ddv_nk12]

i have a pivot megaraizin installed in my car. i noticed that most of the time it shows two readings. 4.7v and 10.5v if i remember correctly. i understand thru some research that 4.7 is the lowest voltage at the start of engine and 10.5 is the real voltage. my questions is how will i know if this is healthy? how will i know if its time to change the battery or my battery has some problems?

i went thru this but still dont get it:
http://www.pivotracing.com/product/VS-M

hope megaraizin users can share or even those who know bout this. thanks.

 

[ddv_nk12]

anyone? anyone can tell?

 

[YYC]

You look for consistency of readings. If 10.5v-4.7v is your healthy reading now (I assume, but look like 4.7v is strangely low) then any other major drop of reading you get means you need to thorough check your battery. Mine reading is 13.4 - 9.6v.

 

[ddv_nk12]

Thanks bro. r there any possibilities that i need to check my battery since the 4.7 is strangely low?

 

[YYC]

Ermmm...Was your battery in good or new condition and 10.5, 4.7v were your readings when you installed the Megaraizin? If not, or if you don't know, get mechanic checked it... Normally you would have some difficulties fire up your engine soon if battery runs weak. The voltage reading is a guide, it just gives you the battery's charge level reading only.

 

[ddv_nk12]

actually i did not install it. i just bought a car and it came with it. thats y i dont know. anyway, thanks mate. ur input has been very helpful.