Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="TypeRwannabe" data-source="post: 2035334" data-attributes="member: 18203">hi guys.. im building a totally new ice system.. and what i've come up with is ..HU : Alpine CDA-9856Specs : Includes iPod Direct Cable 50W x 4 (Max), 18W x 4 (RMS) Power Amplifier 3 Pre-Outs Pop-up Rotary Knob MP3 / WMA Playback MP3 Text Information Display Full Flap Face Design Bass and Treble Centre Frequency Control Remote Control Ready Quick Search AMp : Alpine 4ch MRV-F545Specs : 125W x 4 RMS [4Ω @ 14.4V 0.08% THD] 125W x 1 RMS [4Ω @ 14.4V-BTL (1ch/2ch) 0.3% THD] 100W x 4 RMS [4Ω @ 12V 0.08% THD] S/N Ratio 96dBA (IHF A Weighted Reference at Rated Power into 4Ω) Thermal Management 500W x 1 RMS [4Ω @ 14.4V-BTL (3ch/4ch) 0.3% THD] Comp: Alpine Type X - 177RSpecs : Peak Power: 300W RMS Power: 75W Frequency Response: 35Hz - 60kHz Wood Fibre Cone and Phase Integrated Dust Cap Custom Cast Aluminium Frame Airflow Optimised Dual-Flare Pole Vent 1" Ring Radiator Diaphragm Tweeter with Wave Guide Tweeter Protection Circuit Bi-Amp / Bi-Wire Capable 3-Way/Dual Midbass Ready Gold Plated Terminals and Connection Jumpers Sub: Alpine SWR-1222D Type-R 12 x 1 unitSpecs : Power Handling (Peak): 1500W Power Handling (RMS): 500W Frequency Response: 24Hz - 500Hz Nominal Impedance: 2Ohm+2Ohm Sensitivity (SPL@1W/1m): 85dB Installation Diameter: 275mm Depth: 195mm Kevlar Reinforced Pulp Cone Custom Cast Aluminium Frame with Integrated Perimeter Venting and Heat Transfer Plate Dual Voice Coil Design HAMR Surround and Concealed Mount Gasket Insert Push Terminals with One-sided Layout Designed and Engineered in the USA The question...is there anything that I need to change or add to give both..SQ and SP..but the main thing is of course SQ.. and I havent decided any RCA and speaker cable to match my system... hopefully u guys can guide me.. and I'm looking to spent about rm5~6k max and i just got quoted by one of accesories shop at SS12 for the above system..cost me about rm4.8k..is there any place that i can get it cheaper..? and of course..a good workmanship...</blockquote>

Verification

The Marketplace Latest

BMW F10 ~M5 front skirt lip with glossy black
- Started by jeff6126
- Exterior and Body
Kia Forte gtwing spoiler
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Proton Saga VVT Evo Front Bonnet Hood
- Started by jeff6126
- Exterior and Body
Perodua bezza gear up body kit/spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front bumper set ~M5 kidney grille...
- Started by jeff6126
- Exterior and Body
BMW f30 mad style front skirt lip
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 gts front bonnet hood with scoop
- Started by jeff6126
- Exterior and Body
Proton saga gtwing spoiler
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Adjustable suspension review - Improve Hyperflex II

Fact of life : As you get older your requirements change. Whether it be your taste in wine, your spicy chili tolerance levels or even...

DRIVEN: Mazda CX-5 - Smooth Sailings

Bermaz Motor Sdn Bhd recently invited us for a trip north with their latest compact SUV, which happens to come equipped...

DIY Replace Speaker Foam

Presenting another DIY from khguan DIY customs... http://67.18.37.16/html/emoticons/laugh.gif http://67.18.37.16/html/emoticons/tongue.gif

THis DIY already abandoned for about 2 weeks bcos i...