Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="olskool" data-source="post: 4441715" data-attributes="member: 8544">yes it's pretty easy,I bought 1 pair and changed just the motor coz the one i bought was white and mine is black..remove black (tweeter) cover from inside, remove screws, unplug socket, slide mirror top (if you push the bottom part all the way to the back you can see how the mirror is locked to the base) and it's pretty straight forward. remove remaining screws and walah!better use the one u bought 1st to "practise" opening it just in case anything happens..hope this helps :-)</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

KYB Buzz Spec Absorber for RX7 FC3S

Sold
sold
sold

How to undo wastepipe ???

Anyone know how can i undo wastepipe ?? The wastepipe i mean is make a pipe after the turbo there (downpipe there i think), make the sound like got wastegate 1 leh ..... I already made a mistake in doing it and how...

learn about bolt on....

hello...bro...now...i fell my fit..1.5VTEC...is no power...so..i planing to bolt on..turbo...anything i need to do....i plan...1st-TD04 twin fin..from GSR..2rd-VR4 intercooler...3-e-mange...i only need 0.5bar...so...