Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Kitos" data-source="post: 3953248" data-attributes="member: 44">Heheheh.... i will strictly maintain only 2000cc and below atleast for this moment. After a few years on this stock engine then i will rebuild to add on bigger turbo and perhaps do a twin turbo project but that is much much later lar.The engine is out and resprayed. The mechanics done a good job in cleaning it up and the car bay chasis had not got any single accident so after sand paper polish with good paint on it looks great!! The petrol hose mounting had been relocated to left hand side for safety purpose. The shop also found that the front wheel had already been coverted to pcd114 so i think ex owner should have done the same for the rear wheel :) All the old wirings not being used on the bay are slowly being removed and the dashboard is slowly coming out as well to do remove further unused wirings. The engine condition are in great shape so nothing to do except the power steering is leaking oils so it will be replaced. Here are the pictures so far from today's visit to the workshop :Dhttp://img338.imageshack.us/img338/7858/picture077a.jpghttp://img140.imageshack.us/img140/7495/picture073x.jpghttp://img101.imageshack.us/img101/3059/picture059qe.jpghttp://img81.imageshack.us/img81/9968/picture054nd.jpghttp://img193.imageshack.us/img193/6641/picture045hp.jpghttp://img269.imageshack.us/img269/4643/picture039w.jpghttp://img101.imageshack.us/img101/2919/picture038a.jpghttp://img140.imageshack.us/img140/7255/picture023wb.jpghttp://img44.imageshack.us/img44/9879/picture081na.jpg---------- Post added at 02:54 AM ---------- Previous post was at 02:34 AM ----------This is behind the workshop and you can find some monsters being done by them. http://img213.imageshack.us/img213/4544/picture024c.jpghttp://img34.imageshack.us/img34/5500/picture021kq.jpghttp://img267.imageshack.us/img267/3238/picture052t.jpghttp://img42.imageshack.us/img42/7208/picture043i.jpghttp://img28.imageshack.us/img28/7901/picture025o.jpghttp://img42.imageshack.us/img42/3015/picture040q.jpghttp://img213.imageshack.us/img213/3541/picture041l.jpghttp://img213.imageshack.us/img213/3541/picture041l.jpg</blockquote>

Verification

The Marketplace Latest

original rare Yokohama ADVAN Racing TC4 18x8.5...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing ZE40 17x9jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing INGS TS06 18x8jj...
- Started by david tao
- Chassis and Wheels
New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

FOR SALE: Rear window rubber FD RX-7

Is your rear windscreen rubber looking tired & cracked? Having trouble finding a suitable replacement? Does it make your car look old?

I have 1 new rubber i got from Mazda Japan for sale at RM250. It can easily be...

DIY tools ? remove ways ?

I'm a newbie for DIY n just start my DIY journey. I notice tht i need some tools for DIY but i duno how many of them which i need to buy. 1 more important Q is the remove way. Any1 can tell me the way to remove ALL...

Mivec Head and TC 4g93P

Hi all,
Anyone has ever fit a MIVEC head on 4g93p with a bolt on turbo and 2mm casket?
Will it work??? or waste of time and money?

and how can i use RSM to control the MIVEC opening, as i have ITC and safc 2 so not...