Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="SYeNi69" data-source="post: 4132874" data-attributes="member: 32651">I'm no Sifu but this is sumthing ive learned while playing with turbo 's .. just to share ... In that case ...1. Boost pressure leak ... maybe ur pipes or BOV ...2. Ur actuator/actuator spoilt cause ur not getting stable readings ... for ex. if u are using wastegate and ur spring rate is 0.7bar spring ... there is now way u would get a reading of 0.7 and below if everything is going well :wavey: ... theres no way for u to reduce the boost unless u change the spring ...if u are using actuator and boost is set at a minimum of 0.7 ... same thing ... unless the actuator has been altered ... or spoilt ...how to check for leaks if BOV - simple way ... replace the BOV and try and put battery or sumthing at the BOV hos or pipes ... if boost go up and stable .. it means ur BOV bocor ... if not ... try the ones below ...How to check if ur actuator or wastegate prob ...- simple way ... disconnect the vacuum line going into actuator or wastegate and shut it with a skru or anything that can fit in the small hose ... if boost go up like mad ... it means its working ... but then if ur boost meter showing that its still stuck at 0.5-0.7 even at WOT ... go get it replaced ... try this and be gentle with ur FOOT !!How to check if got leaks ... - get two boost meters ... the vacuum hoses - one tapped at the turbo housing or sumwhere near the turbo (b4 any hoses and intercooler) and the other at ur intake manifold ... if there is a difference in reading then got leaks ... the one at the turbo is showing the correct amount of boost ... The one at the intake manifold is the amount going into the engine ... there shouldnt be a difference ... if different check ur pipes :wavey: this is some of the reasons ... heck there are alot of other reasons but then these are the basics ... <img src="https://zerotohundred.com/forums/styles/default/xenforo/smilies/biggrin.gif"  class="smilie" loading="lazy" alt=":biggrin:" title="Biggrin    :biggrin:" data-shortname=":biggrin:" />HAPPY BOOSTING <img src="https://zerotohundred.com/forums/styles/default/xenforo/smilies/nurse.gif"  class="smilie" loading="lazy" alt=":nurse:" title="Nurse    :nurse:" data-shortname=":nurse:" /></blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

everything about adj suspension

ok i had try the tein super street not satisfied for going fast. not recommanded. Now i am using hks hipermax 2 is good but not hard enough for me.

i wanna ask, can i change spring rate?? using the same brand...

4 Yrs in the Making of Pink xxx ... The dream is finally coming true!

Hello guys an gals.

This is the long story takes place 4 yrs ago, when i aquired a No Cash T3/T4 turbo setup from Gene Hypertechnokraft, an once dropped it in my faded pink 92 turbo mr2. Once i started her up i...

Air Fuel Setting, How To Setting

Hello dude,

Can anyone tell me how to setting the air fuel setting?
Someone told me is by adjust the MAS screw at the Throttle Body, a screw with spring.

Can anyone show me where is the screw?
I'm using an satria...