Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Veloc" data-source="post: 4545787" data-attributes="member: 92511">Hi...Not an expert in NA tuning here.. Got a few questions to ask... For others, feel free to add questions or contribute some experience.I am planning to get a Blacktop 20V in the future. Just want to ask regarding Na tuning for the engine.My first question for this thread is... Let's say, if I would to swap the camshafts for a 272 or 288 or even a 304 degree camshaft, how will the fuel consumption be like? Will the blacktop still be able to maintain the good FC as the stock camshaft or will it increase?I ask this because the blacktop utilizes VVT to activate/deactivate the high cams based on throttle position. So let's say if I swap it to a higher cam i.e 272 or 288 or even a 304 degree camshaft, will the FC be the same for city/normal driving since it will be running like a normal 16V engine without using highcams.For aftermarket camchafts for Blacktop 20V, do they just increase the lift and duration of the highcam lobes (VVT cam lobes) of do they do it to the normal low cam lobes as well?Because if they do it to the low cams as well, I'd expect that the FC & drivability wouldn't be able to remain the same. So I think I will not go for it ;)</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

ITT: Powerful RB26, inside a DMCC S14, Porting and flow-bench heads

Yesterday I went to a local fabrication shop (AVFAB) to see what they've been working on for the upcoming season, and get a glimpse into some of the work they can do, like most of you I'm always looking out for who's...

Can't help but post this..

The noise really gets stuck in your head... and you just want to watch this over and over again..

It's no Altezza but it's an IS 300.. and you know what kinda 'heart' lays inside it. :adore: