Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="astinabpt" data-source="post: 2087240" data-attributes="member: 5835">dude, where got sifu here, we're all frens only hehehe.. what type of fuel pump are you using now ? if stock BPT fuel pump, not even 1bar, dyno tested, 0.8bar also already got small bump with your a/f ratio once boost kicks in at 3500 RPM, not a good sign. been there done that. do not waste your time and losing sleep thinking about it, get a Walbro 255lph fuel pump, more than sufficient, even good for your future upgrade. stock bpt fuel pump meant for standard boost. SAFC - two fold function, to kautim the standard boost cut, and to fine tune the amount of fuel injected into combustion chamber via modify the pulse sent to injectors by ECU. if you're using stock injectors, still useful to disable the boost cut, and fine tune to fully optimize the fuel band. stock BPT injectors still good with stock VJ20 turbine of BPT to 1.2bar. more then 1.2bar, VJ20 already not capable of delivering more power, and that will be unhealthy to the turbine itself.dude, no worries about the 255lph Walbro fuel pump. with high pressure fuel pump, doesn't mean your fuel consumption will be more than stock fuel pump. what we need is a high pressure fuel pump that can support our engines during boosting / high rpm. you can use stock TX3 1.8 n/a fuel pump inside your machine and drive up to 200km/h, but you can not boost your car, all the time in vacuum hehehe. but we use turbo because we want to boost it, rite ? to feel the sudden jerk to the front, rite ? to smoke other n/a cars, rite ? hehehehe so use hi-flow fuel pump, they can cather enough fuel during boosting. excess fuel will flow back to your tank via return pipe. dude, you get Walbro fuel pump, install SAFC, get a front mounted intercooler, I would suggest you to go dyno test to fine tune the SAFC to match your engine setup with fuel pump with stock injectors. get a better flow air filter, try boost 1.2bar. provided your engine is healthy, no clutch slip (even with standard 9" BPT clutch, not talking about racing clutch here), if your stock turbine VJ20 is healthy, 200hp is within sight with torque range from 26-28kg/m. been there done that. all the best!</blockquote>

Verification

The Marketplace Latest

original WedsSport SA70 18x9jj offset +32 5H pcd...
- Started by david tao
- Chassis and Wheels
BRAND NEW original rare Yokohama ADVAN Racing RG4...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RZ2 RZii...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG 16x7jj...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG 16x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37SL 18x9jj offset...
- Started by david tao
- Chassis and Wheels
Spoon Sw388 18x10J+40 5H120 Rim Rims Civic FL5 Type R
- Started by aycy
- Chassis and Wheels
Spoon Crane Neck Wing Carbon Spoiler GT Wing Honda...
- Started by aycy
- Exterior and Body
Honda Jazz/Fit GK Mugen body kit
- Started by jeff6126
- Exterior and Body
original TWS Taneisya P1 racing 17x8.5jj offset +28...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Bouncing RPM +

Hi bros,
Need some opinions here..

I recently installed a pair of adjustable cam-pulleys on my GSR. Everything ran like a charm till recently, on approx 30-50% of throttle once the rev reach 4000rpm's the needle...

FC3S Silicon Hoses

Anyone interested in the above item?Brand new.S$150.

GTR 33 for sale??

hey, there is a GTR33 for sale around 140k+ in sunway area.... any of you guys heard about this/interested??