Share my DIY overhaul picture.

[feipepe]

Hope this link will help.
http://www.megaupload.com/?d=02ODHWUB

Password for rar file is
MP3 Downloads and Songs - many are free - chipollo.com

---------- Post added at 09:33 PM ---------- 6 hour anti-bump limit - Previous post was at 09:17 PM ----------

Why cant I post the link?
"http://www.megaupload.com/?d=02ODHWUB"

bro,
do u have the silvertop manual guide. quickly interested with this manual

 

[me2kimi]

nop, only got blacktop manual. Silvertop and blacktop are almost identical. So can refer to blacktop manual

 

[EDRA]

hello fiends..long time not online zth..got more diy members oledy..just wanna ask u bro u using back the old pistons or replace the piston ring only? have u honed the cylinder wall before fix the piston in the cylinder?

i want to know how much mileage ur car/engine before u overhauled? how do the valve seal looks like during u remove it is it easy to crack or still good? just for analysis..

 

[me2kimi]

Hi bro. I only replace piston ring and use back the piston. As i didnot remove the block, so no hone job been done.
Milage before overhaul is 140xxxkm.
I didnt know much about valve seal coz took the whole head to worksyop for grind valve.
That worksyop also did installed valve seal. Hope it will help.

 

[EDRA]

thanks bro for ur info..140k km not too high actually but the engine head very damn dirty..looks like 300k km already..this might be becoz of using local oil filter and wrong viscosity of engine oil maybe (20-50w)..by the way good job bro..

 

[me2kimi]

Yes 140k is not to high. Maybe japan owner lenjan kow2 before scrap this car. I just use it not more than 15k km and it start drink engine oil. Thaty why i had to rebuild.

 

[poland11]

where ur got spare part

 

[me2kimi]

most major spare part shop got. If they don't, they can ordered it for you

 

[kolver99]

hi Kimi,

do u know how much the price if doing the top overhaul at workshop?

 

[me2kimi]

Hi,
I think it depend on your engine condition and workshop. Mostly arround RM 1.5k-2k

 

[levin818]

GoodSpeed at Kepong is offering SVT/BT head swap at RM1.2k. With piston ring change is RM1.6k. With TRD head gasket at RM1.9k. You will get a head with P/P, valve work done etc...
For details of what you will get or price matter, you can direct discuss with the boss Ah choy at 019-2248577. No English please