Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="moppy" data-source="post: 358872" data-attributes="member: 2006">Agree too, look nice and more queit that before.Mine is 4G92 did a conversion, with 4G91 Head. I was in dilema of swapping the head for so long and finally I did it. I hv studied a lot of the 4G91 head and 4G93 and gather up the information. There's a little different between this 2 head.1) The cams profile different2) Valve spring - 4G93 is about 5mm higher3) The valve porting size, needn't to say the smallest is 4G914) The piston head, 4G93 is bigger so obviously can see which is 1.5 and which is 1.8.I hv done a polish but not porting, my mechanics advice me cos might occur pick up power lost. Comparison 4G91 DOHC n 4G92P, the power output is more or less the same therefore 4G92P is ideal to use 4G91 head. His personal opinion said 4G93 head is bigger port as a result might loose a lot of pick up power compare using 4G91.After the conversion, yes I dmit I loose some pick up power but not much loosing. Anyway still notice the different, at around 3200 rpm I could feel the power is in control until I rev. 7000 rpm without any problem. My car is auto, but normally I rev. until 6000 rpm.Another case, my brother driving a 4G93P SOHC and he swapped to DOHC. He was conned by a foreman (in Shah Alam, dun go there anymore) said that swapped with 4G93 DOHC. That moron foreman took out the EGT as a result my bro. car disposed a lot of carbon. Then finally I took his car back to my mechanics and overhaul the head. At the end everything restore to be original with EGT and DOHC head. The head finally being ported back to 4G93P valve porting size except the cams. Can't do anything about it cos can't find a 4G93 cams.The results, my brother car suffer a serious problem at the pick up but has a good top end. Very good top end, and at 120km/h the car still can drop gear. By the way it's auto as well.The above result might not be the same as in different car and just my bro. n my experience. There are a lot of reason why this has happen.</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing ZE40 17x9jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing INGS TS06 18x8jj...
- Started by david tao
- Chassis and Wheels
New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

The 2012 MLOC AGM "Drive The Passion"

The 2012 MLOC AGM is a major revival of the club as we move into the future. It took us 3 years in the making of this year AGM with the aim to provide members with more fun activities with an experience of a...

Ned Some Help For My FC

Hi to all the SIFU around here, i'm new here and i just got myself a FC recently

The ex-owner transplanted a SR20 into the FC and now the engine giving problem d, i was planing on tranplanting a 13B back into my car...

Rx 7 Manual Half Cut For Sale

RX7 manual half cut for sale rm5.5 k with big intercooler rear axle and dis included pls call 012-3367457 frankie
View attachment 615305