Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="ABV9750" data-source="post: 1230547" data-attributes="member: 9375">original suzuki use tokico as factory std.OEM parts is a kayaba.if you wanna enjoy comfort std ride, kayaba just enough.at sen hui sentul, they sell around rm140-170. i'd try it before and not much different with old one.i try monroe and its firm a little it more due to gas filled.drop down 35mm with B+G spring, the car hits harder at pitshole and ram.handling much improve and confident.with full loaded,the car still stable.i then try koni adjustable with a few setting, feel soft but stable.kmh at the hiway with bumpy road (johor area), still good.due to family concern, i change to gti spring and till now, the suspension is nice and firm.to hold the grip during cornering, 15" alloy wheels is just enough and i add a gti sway bar (original 2 doors have it), cornering even sharper, no oversteer.so when we wanna choice the best damping, we need to match all.and most important is your required set up.std comfort and stability - kayaba (oil base)firm ride and xtra stability - monroe (gas filled)xtra comfort with stability - koni damping adjustable.firm ride, comfort with xtra stability - koni with eibach / apex springfor competition - suzukisport damping adjustable and spring. (very expensive)for road use and competition - suzukisport damping with gti spring.for competition set up - hotbits ride height and damping adjustable (most popular in aussie)..pric range is Spore, sgd 1200. still cheap compare to speedwork price = rm3500.the absorber come with hotbits performance spring.other brand to avoid:local assemble absorber and spring. e.g kimex spring, koni red, GAB red, PRS ride height etc.these brand is nice during first installation and deteriorate rapidly and you loose your grip and comfort.other option:customize absorber by rebuild it. a few swifter had try but it costly.the result is depends on owner.fyi, for any brand you choose, please ensure it has a certificate. e.g TUV.this is the german toughest test.normally it can withstand for more than 5 years. e.g Koni absorber.it can last till 10 years with proper set up and care.</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing ZE40 17x9jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing INGS TS06 18x8jj...
- Started by david tao
- Chassis and Wheels
New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Zerotohundred & the VW R experience

Remember our visit to the Autostadt here? When we were there, we were also shipped off to...

Walker Wilkerson does insane backwards entry at Formula Drift Florida w/video

https://www.zerotohundred.com/wp-content/uploads/2011/06/fd-600x338.jpg

Backwards entries are the in thing now in drifting and some of the entries that the top drifters can pull off are simply crazy. This however...

HKS Japan. A visit to their colossal performance facility

...