Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="shiroitenshi" data-source="post: 2803379" data-attributes="member: 27518">There's not much that can be done to strengthen the B20 block short of sleeving it with ductile iron sleeves.Other than that, the headstuds are to prevent loosening of the head and block as normal bolts would stretch quite a bit when running high compression/high boost.conrods are for lightening (this depends on the company that makes it, some are stronger and heavier, some are lighter but around stock rod strength)I-beam, H-beam, (Pauter-style, dunno what beams) are just some examples of designs they played with for weight vs. strength.If for track, the only way your B20B is going to survive is if you go conservative on most mods, like no extreme compression in the 13SCR range, no crazy cams, no stratospheric revs, etc.If for drag, I think anything goes in terms of mods._________________________________________________Pet Peeve of the Week.(What is it with ZTH, maintainance and lost posts?)</blockquote>

Verification

The Marketplace Latest

New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Airtrek Front Mount Intercooler Size

Hey guys

I am quite concerned about the size of the FMIC I need to get was hoping someone here can answer my question.

The kit I am looking to get has a 500x315x90. Is that too big/not a good size?

What is the...

where to fix supercharger ??

hey guys out there.. need u guys to intro some workshop 4 me where to fix supercharger?? thx

can DIY repair rust?

hi all...
i got many spot got rust on the car body...

can DIY ?

i thinking...
1. use sand paper or machine sander/dremel with wire mesh bit to remove rust
2. take it to shop with welding machine ask them weld (...