Sub Woofer Kicker C12 Ported Enclosure Measurement [HELP]

[Viperize]

Just got the sub and need to comfirm the box measurement.

These is suggested by my fren :

Length : 37" inches
Height : 14" inches
Deep : 14" inches [downside]
Deep : 11" inches [upperside]
Pipe : 3" inches big & 4" inches long X 2holes

This suitable for SPL ? Sub used are 2 units of Kicker C12

Iswara saloon

 

[Zenn]

looks very SPL to me...

 

[cacin]

is this the sub?

http://www.cardomain.com/item/KIC05C124

I thought there should be a manufacturers recommended enclosure size.

What you can do is, find the thiele/small paramater for the speaker, download the winisd alpha software. Use the software and the select the sub model. and then, key in the box parameter that your friend suggested. From the graph, you can see how the sub behave.

 

[Viperize]

is this the sub?

http://www.cardomain.com/item/KIC05C124

I thought there should be a manufacturers recommended enclosure size.

What you can do is, find the thiele/small paramater for the speaker, download the winisd alpha software. Use the software and the select the sub model. and then, key in the box parameter that your friend suggested. From the graph, you can see how the sub behave.

Yes, that's the sub. The sub box is giving me a headache.

My iswara saloon is put in 14" height box it will hit the 6" rear mid magnet.

Then my fren suggest me to remove the mid from rear to boot (put them beside sub)... at 1st i thought it was ok but listening inside the car become less solid... can someone give me suggestion ?