Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="gerard" data-source="post: 263433" data-attributes="member: 7656">Hi Ijnek & Celica10Development work have been concentrated to the 4G15, 4G16 & 4G93 with mitsubishi electronics and now that we have succeeded, we will try out the same concept in cars using siemens. I beleive it should not be too much a problem as now we have already set the benchmark..w will keep you guys updated with latest development. ;) As we are a tuning outfit which does R & D and not really a big corporation, we can only take 1 step at a time :blink: . Dealers in JB or other states, none at the moment but blueprints are in the making, so either hang in there or make a trip to PJ and meet us. As for now, it's concentrated in Klang Valley area only....It's a bolt - on kit which requires only a day or two max for installation, so a weekend, ie: friday, test - confirm, install on saturday, Sunday you are on your way home smilling... :rolleyes: rafs_7877You can contact me 1t mobile 012-3073928 or 012-3872153 or e-mail at <a href="mailto:gerard_kiong@yahoo.com...We">gerard_kiong@yahoo.com...We</a> are located in PJ and if you or any of you guys are in the area, and wanna meet up and teh tarik (at night lah). Drop me a thinker. I'm happy meeting new friend who shares the same common interest in modding cars and stuffs related to cars.... :D TE27levinCool, a 4agze in a saga, must be some cool work yeah!..JPJ, damn My Kembara with 4agze took a long time to complete cos the engine bay is really compact and JPJ inspection and approval took me 4 times as it was something they have never seen before (such a hybrid) they dare not pen their name on the dotted lines unlike the wira with VR-4 (common)...very, unhelpful of them as all the test conducted was pass but they fail me for minor stuffs like brake lights not bright enuf....... :ph34r: Thanks too for reading my post and hope you are having tons of fun toying around with superchargers.....I know I will... :D XcheongThanks for the encouraging words and it is such words from people like you guys that will motivate us,keep us going when the tought get tougher (alwiz happens)and keep us in the right direction. Many thanks again my contact is stated above and if you are around the area, drop a line ya and well meet up...... :rolleyes:</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

r32 gtr drivetrain diagnostic..

dear guys,

whats wrong when u put ur r32 gtr on a ramp and put it into gear but only the rear wheels are moving?izzit a sensor issue or.....please advice.

secondly does anyone has a spare r32gtr speedo meter cable...

Fuel Consumption of S15 Spec R (M)

sifu sifu any S15 owner mind to share how much the fuel consumption of S15 Spec R Manual ??? and how much the maintenance cost of S15
e.g. Timing belt , clutch and etc. . . ..

thanks

Restore ur rims on your own today..

:o This is one of my small wedsport RS-5 restoration project..

just wanna share with u guys..

http://img165.imageshack.us/img165/233/diy01jx0.jpg...