Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="dennisdreams" data-source="post: 2302495" data-attributes="member: 23218">There's a lot of definition for short stroke absorber. There;s one, which is the shaft(silver shinny thingy) and it's barrel (body) was short. and another is the shaft is short but the barrel is still long.So far for all the Gab absorber i manage to get my hand on (dissect and cut open) the so call AVCS sys is the same thing as the valve you will get in any normal KAYABA absorber. AND be aware, there's a lot of counter fare GAB on the market, especially in Sunway City. Did you saw a welding line around the original welding line on the absorber? If not, they cut the tip of the absorber short only. Nothing other is done to your absorber.RM1200 is definitely OVER charge~! For you setup, i think you can get it around RM350 in our shop (w/o the spring).Lastly, my recommendation, you can try use, original spring, cut one round off, heat-treatment at the point of the last quarter of the cut edge to make it's angle less steep so it will sit better on your absorber's bow. then cut one inch off your stop bump~ and walla, you get a two finger gap between your wheels and mud-guard and a comfort ride.</blockquote>

Verification

The Marketplace Latest

original rare R-Pride Wado Sakura flower 15x5jj...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing TC4 17x8jj...
- Started by david tao
- Chassis and Wheels
BRAND NEW original rare Yokohama ADVAN Racing RG3...
- Started by david tao
- Chassis and Wheels
original FD2R akagakiracing titanium 2.75” exhaust...
- Started by david tao
- Engine and Performance
original GT86 BRZ akagakiracing titanium 2.5”...
- Started by david tao
- Engine and Performance
2pcs only, original rare spec Rays Volk Racing CE28...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RZ 18x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare spec Rays Volk Racing CE28 16x7jj...
- Started by david tao
- Chassis and Wheels
Honda CITY 1.5 E (A)
- Started by PIstonHeads
- Cars for sale
original BBS RE013 18x8jj offset +50 5H pcd 5x112...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Altezza RS200 AT

hello..its my first post :)

i have Tezza RS200 AT and i want to exchange my differential to MT LSD differential. it is posible?

my tezza 2003 yeah, LTD Edition

mivec turbo parts

Dear sifuss in zth,

question.

1) can i use back my 1.8 n/a block..if can what should i need to do?
2) what is oil squiter and any pic for that portion?
3) what is oil squiter funtion for?

cheers :biggrin:

how to join as a member ?

hi !! to all MR2/S members,
i just got my MRS,
so how to join as a member ?
need anything to join ? anual fees or ..?

here got how many MRS owner ?
coz i see almost all MR2 owner only,
just one MRS owner with DAMD...