Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="adnone0" data-source="post: 1132638" data-attributes="member: 2962">My experience during the last CNY, timing belt snapped prematurely at Jertih (small town in Terengganu) .Wait 2 days for the belt (cuti CNY) and install . Head back to Paka , terengganu(200km jpourney) . Till now is still ok. Actually my belt snapped due to tensioner bearing tilted due to the mounting point of the bearing senget - due to poor re fabrication of the bearing mounting (bad engine conversion) . yes...just change the belt n drive. but usually when doing timing belt change also change the tensioner, seals coz hard to access those area .also inspect water pump area for abnormal condition.</blockquote>

Verification

The Marketplace Latest

Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body
original rare Black Racing Pro N1 16x6.5jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37SL Black Edition...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

2019 Mazda 3 GVC Plus Test: Liftback 2L vs Sedan 1.5L

2019 Mazda 3 GVC Plus Test: Liftback 2L vs Sedan 1.5L...

[DIY]Simple Switch Control-Wira

Get Dimensions
Width = 9.2
Height = 4.8

Switch
height - 1.9
width - 1.4

Get Materials.
Preferably Aluminium Sheet 0.7 mm or less. . Plexiglass might crack while cutting(Unless you have sum advanced...

Non STi impreza compatible to use RON95?

anyone wana highlight this to me?? Would there be any side effect of continue using these inferior RON fuel...

I look at my instruction manual, it still comply but off course can feel slight power loss...

fyi...All...