Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="enjin" data-source="post: 1064478195" data-attributes="member: 161336">Hi, as per title, plan to do top overhaul on my wira 4g13 MMC injection. would like to enquire about parts n process involve during top overhaul. My car got leaking for a while now, so instead of changing the gasket only, I prefer to make it one time job. Not interested in full overhaul/engine rebuiding as the cost might as well buying new engine/car dp.Parts:1) Head gasket (cld be normal or metal one)2) Valve seal3) Valve cover gasket4) Valve guide, valve seat (may change if u plan to keep it longer)5) Intake manifold gasket6) Head bolts (old one tend to stretch) 7) Other cheap2 oil seal and gasket (oil sump gasket, crankshaft oil seal) too many seal, even foreman not know the name, lol. but important to know where it is located.Open up a little bit further, u can also replace ur piston ring or conrod bearing as these things also has its wear and tear. You are going to full overhaul already.Process1) Head skimming (good time to skim it, as long as within manufacturers limit)2) valve grinding (to keep good sealing between valve surface and port hole for good compression)3) Wash parts with petrol (esp parts when u open rocker arm cover4) Cleaning/ decarbonise parts (piston head, intake manifold etc) most cheap overhaul w/shop will skip (3) and (4). 5) You can also opt for Port and Polish while you at it. (better result if u plan to do engine mods like hi-cam, etc)This is also a good time to change other parts to minimise work, like water pipe, water bypass hose, belting, water pump etc if they need to change. Also a good time to flush ur rusted radiator. check if there is any leakage too.As for the parts part, what else that could help in engine performance and high wear and tear rate? piston, valve itself? Thing is i plan to buy the necessary performance part myself, any part and brand to recommend? Not all workshop capable of doing above process, so they ll sub it to machinist, hence higher cost. Those process might need professional touch, at least for me. If u happen to do or have recommendation of such workshop, u can list it here also. Think any engine will share more or less of above information. So please share your experience!</blockquote>

Verification

The Marketplace Latest

original FD2R akagakiracing titanium 2.75” exhaust...
- Started by david tao
- Engine and Performance
original GT86 BRZ akagakiracing titanium 2.5”...
- Started by david tao
- Engine and Performance
2pcs only, original rare spec Rays Volk Racing CE28...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RZ 18x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare spec Rays Volk Racing CE28 16x7jj...
- Started by david tao
- Chassis and Wheels
Honda CITY 1.5 E (A)
- Started by PIstonHeads
- Cars for sale
original BBS RE013 18x8jj offset +50 5H pcd 5x112...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG3 18x8 18x8.5...
- Started by david tao
- Chassis and Wheels
original Endless M4 S2 4pot 2pot brake caliper set...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG2 17x8.5jj...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Happy Chinese New Year!!!

:wavey: To All MLOCians Members....Wishing U All:

'HAPPY CHINESE NEW YEAR!!!'
:party:

:party...

moded number plate light for evo9 rear bumper...

just to share...

when i bought the evo9 rear bumper, it came without the number plate light holder ... so i make this mod...

i spent lots of time trying to measure the position of the light, i thought it gonna be...

Wira SE with siemens ECU

my question is,the 4g15 with siemens ECU can be matched with high cam?i think it does need a piggyback to fine tune the fuel.so does this kind of mod possible?need ur expert advice.