Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="yolk" data-source="post: 184548" data-attributes="member: 320">Okay baru bangun tidur :blink: .. time to update B) Okay here is the details of the project. When william first mentioned about project for 2005 I thought he want to do like PROJECT D .. wanna mod 20v kow kow to showcase the power :unsure: :lol: but after talking with him in details .. here is what is involved 1. Is to remove the vvt and buang2. Masuk adj cam pulley to replace vvt puley3. set and do valve clearance4. to make the engine quiet as brand new 20v5. to make more power than stock 20v with vvtOkay since this involves removing the vvt pulley and a lot of people love the vvt I can assure you that after putting the adj cam pulley the engine behaviour totally change. I love to high rev my engine and am not too bothered about low rev so I told william this. So the goal was to make more power from engine at 4k rpm and above B) I never see someone set cam before and OMG I can tell you it involves quite some work and calculation and not forgetting you need to know the angle/duration where the stock cam should be in. This is not a simple job that ah kow and ah seng can do. Basically it's a job for tuner or engineer B) As some of you know I already done valve clearance and after some hard driving the sound came back. Was very sad with this outcome and told it to william. Hence he said the best way is to change the VVT pulley to brand new one which costs like RM 1k :blink: or change adj cam pulley so I take the cheaper way out la. ;) Don't mistaken the sound from valve clearance and vvt pulley. At first I thought all the sound is from vvt pulley and nothing to do with valve clearance. But once I done valve clearance (read my report on the effect from valve clearance) it was quiet for a while but the noise came back from vvt pulley and the noise from vvt pulley itself is different from noise from valve clearance. Very distinct type of noise.Anyway so we install the adj cam pulley and set everything back to standard cam timing then William look at me why your cam timing lari so much so I also said dunno. Then he asked me if I got metal gasket I said yes and also told him my head has been skimmed before due to previous problem with engine. Then he said no wonder laaaaaaaaaaaa .. apparently when you play around with the gasket thickness or if got skim the head/block the cam timing will definately lari and will not give maximum power/benefit. No wonder I change metal gasket also cannot feel any difference laaa coz cam timing sudah lari kow kow. So William set back the cam timing and it was time for a drive. Aiyoooooo mak bapak the car so sluggish don't wanna move totally unsatisfied. So go back to him after going one round and he play around with retard/advance of the intake/exhaust pulley. Then go one more round waaaaaaa low end damn kow good press accelerator only the car move .. so willing to move but after 6k the engine felt dead. Again don't like it went back there and told William. So again set set then out again. Waaaaaaa this time below 5k like shit and above that like walanehhhhhhh .. but still don't like so head back again and set set set. Now is in between setting. Now below 3k the car like damn bodoh then 4k onwards BAMMMMMMMM it's like got vtec open :unsure: :lol: The car suddenly just pull all the way to redline walanehhhhhhhhhhh ... BLOODY HELL ... the rev feels lighter and car feels much more willing ... go back to the shop smiling then mr 4agze who was there also said he wanna try so he went one round and came back ask william when he also can do it B) :lol: I have no idea if it's retard or advance or any shit like that laaaa .. hahahah ... for more details pls consult the 4AGE TUNER B) Basically by throwing away the vvt and putting adj cam pulley you are able to play around with the powerband to suit your driving style. This is one mod that TRUE enthusiasts MUST DO. It totally change the engine behaviour. I don't believe I'm driving the same car and this is only with stock cams ... i wonder how it will feel with some aftermarket cams.... MUAHAHHAHAHAHAHAHAH ... B)</blockquote>

Verification

The Marketplace Latest

original FD2R akagakiracing titanium 2.75” exhaust...
- Started by david tao
- Engine and Performance
original GT86 BRZ akagakiracing titanium 2.5”...
- Started by david tao
- Engine and Performance
2pcs only, original rare spec Rays Volk Racing CE28...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RZ 18x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare spec Rays Volk Racing CE28 16x7jj...
- Started by david tao
- Chassis and Wheels
Honda CITY 1.5 E (A)
- Started by PIstonHeads
- Cars for sale
original BBS RE013 18x8jj offset +50 5H pcd 5x112...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG3 18x8 18x8.5...
- Started by david tao
- Chassis and Wheels
original Endless M4 S2 4pot 2pot brake caliper set...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG2 17x8.5jj...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Questions on making 400WHP MR-2

Hey guys!!!
I have'nt touched my engine yet its bone stock........so before i start on my quest for power i wanted to set power goal!!! and i chose 400whp. I wanna know if its possible to attain that kind of power...

trouble code / fault code for 3sge beams engine

hi all...

on behalf of my friend.. he want to know if there is any of altezzaians here know/keep the trouble code for 3sge beams engine?

if u don't mind, can u share it here..... :biggrin: