Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="kyheng" data-source="post: 923345" data-attributes="member: 13624">Maybe that is the cause of the cracking sound, I think you better connect it to your amp. If not, it will spoilt your HU in long term. It will not blow your tweeter, as long as you connect it with the cap and bulb. Your amp is 4 channel? It should be installed below your seat. You can check that now only 2 channel is running (1 pair of RCA cable only). Tell you what, you go to eletonic shop and buy a Y-spliter or RCA spliter(1 female input and 2 male output), then follow the steps below 1. Take out the RCA cable from your amp and install it to the RCA cable.2. The 2 male output 1 will put to front channel and 1 will put to rear channel. 3. Your amp should have 2 set of gains for each channel. The one for your midbass that you are using now can leave it. 4. The other one is for your tweeter, that one the gain you have to put to minimum if you don't want to install the cap and bulb. This channel you can for yoir prefence. The bass you have to set minimum, trebal around 25 to 50%.</blockquote>

Verification

The Marketplace Latest

Mitsubishi lancer Evo x front bumper
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
Proton S70 body kit
- Started by jeff6126
- Exterior and Body
Proton saga BLM body kit
- Started by jeff6126
- Exterior and Body
Perodua bezza ~accident repair
- Started by jeff6126
- Exterior and Body
Mercedes Benz W205 C-class GT grille
- Started by jeff6126
- Exterior and Body
BMW E90 ~brake caliper spray ~rim spray
- Started by jeff6126
- Exterior and Body
Honda city gm6 FL front bumper
- Started by jeff6126
- Exterior and Body
original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Changing Alloy Rim Colour: Need advice

Dear all ZTH members,

I hope to get some advice from experience forumers here. I am a total noob in changing colour for mags.

I am planning to change my rim colour from the usual silver to matt black or gun metal...

haltech e6x wanted

here serious buyer looking for haltech e6x with complete harness for evo 123.. do col/sms me at 0193049057..anytime

just wanna know

anyone who just attended a party at oug housing area on 15th feb?
i just wanna know if they are members here, cos as these ppl parked everywhere in my housing area, and sped off when they left leaving loud noises...