Used 4 channel Amplifier and Alpine Subwoofer

Status
Not open for further replies.
ICE -In Car Entertainment

Used 4 channel Amplifier and Alpine Subwoofer

Dickson Lim Tick Sing

From Facebook
Joined
Aug 29, 2010
Messages
114
Points
516
Used Bm Boschmann Amplier, good for sub

1. Used Avantgarde valeraine amplifier with upgrade burr brown -SOLD
-Add another RM100 for 2 x 30A cryo fuse.
-4 Channels
60Watt RMS per Channel @ Stereo 4 Ohms
90Watt RMS per Channel @ Stereo 2 Ohms
150Watt RMS per Channel @ Mono 4 Ohms
T.H.D. Frequency response: 20Hz – 20kHz
>90dB Signal to Noise Ratio
>50dB Seperation @ 1kHz
0.2V – 4V input sensitivity
20kOhm Input Impedence
Damping Factor >150
Dimensions: 370 X 58 X 210mm
Weight: 3.33kg
-I used to own steg aq 75.4 and this amp is simply better.
Valeraine VX-2i active crossover

2. Used Alpind dd drive 12" woofer DDW-F30A include seal box-SOLD

3. Used BM Boschmann PCH-990ATX 2 channel amplifier - RM 330
Specification:
Impedance: 2Ω stereo, 4Ω bridged
Power rating: 2 x 900W RMS into 2Ω, 450W x 2 into 4Ω 1800W max bridged into 4Ω
Freq response: 10Hz - 40kHz
Channels: 2/1 bridgeable
Input sensitivity: 200mV to 2V
Low pass filter: 40Hz to 150Hz
High pass filter: 150Hz to 1.2kHz
Remarks: 1 of terminal has been replaced by aftermarket screw but it doesn't affect the performance, work like charm, can test kao kao before purchase.

Kindly sms/pm Dickson-0122042666 for fast deal.
 

Attachments

  • _DSC1630.JPG
    _DSC1630.JPG
    424.6 KB · Views: 1,000
Last edited:
Hi Bro,
May I know where is your location and what is the dimension of the sealed box for the sub?
 
Status
Not open for further replies.

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience