Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="gunnerzz" data-source="post: 1064542444" data-attributes="member: 166532">Here it is then..The diagram. This diagram is using multiple capacity cap. The number of caps is up to you, some say more or bigger capacity is better.What u need;-( 4700uf, 16V/12V capacitor ) x 4-( 3300uf, 16V/12V capacitor ) x 4-( 1000uf, 16V/12V capacitor ) x 10-circuit board-box-wires-fuse holder-wire terminal<a href="http://s280.photobucket.com/user/gunnerzz_8094/media/20140714_185221.jpg.html" target="_blank">http://i280.photobucket.com/albums/kk167/gunnerzz_8094/20140714_185221.jpg</a>Sorry for the bad drawing. The basic connection is like in the drawing but u can use your imagination and creativity to place it on the circuit board in order to save space or have the better looking end product. For the fuse holder, u can buy one at any spare part shop.As i discover when i did this in 2008 is that the shop did not have much stock for capacitor so not all VS i made is using the diagram above. This is another design i made using only 4700uf capacitor.<a href="http://s280.photobucket.com/user/gunnerzz_8094/media/20140712_171155.jpg.html" target="_blank">http://i280.photobucket.com/albums/kk167/gunnerzz_8094/20140712_171155.jpg</a>In this design, there is also an LED indicator. Do remember to connect a 1k resistor to the led or it will burnt upon connection of the terminal. I just used normal auto wire in the VS and it works just fine. To make it easier to connect, i also uses the green wire terminal and solder it to the circuit board.If i recalled correctly i made lesser of the VS with multiple capacity capacitor compared with the single capacity capacitor as thats the most commonly sold capacitor. 16V will do fine.</blockquote>