Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="roulette23" data-source="post: 4434965" data-attributes="member: 82474">Before deciding on a BOT, its best to know what you’ll be expecting from it. The price for investing in this will be high but if such a price yields the power being sought for, then proceed so with a fair bit of warning. I had a BOT built into my Honda VTEC engine recently. The power that it delivers are commendable however, the downside to it was the constant visits to the workshop trying to sort out the issues plaguing such as erratic idling, downshift issues, etc… This will take time to resolve as well as money hence, the price of putting a BOT might not necessarily stop when the turbo is installed but what comes after that. I had mine installed in a respectable workshop in Section 51A (near Jalan 222). Convinced by the years of experience that they had with modifications, I was hooked on it even when the price was higher compared to other workshops. The layout of the turbo was visually good however, getting it tuned plagued by constant issues that arose after that made the drive less pleasurable after a couple of months of owning it. This persuaded that such constant headache was not well worth it unless it was my ‘play car’ which in this case was not. Naturally aspirated (NA) cars are not made to handle forced induction systems due to certain constraint within the engine which was designed as such. The heat that was increased with the installation of the turbo was at one time so high that the sockets, wires, etc.. just melted away creating a whole host of other issues for me to sort out. Conclusion, although a thrill to have the pinnacle of what you can possibly do in the car modification sector, it is for me and this is my opinion from actual experience, the end did not really justify the means. Get an actual turbo vehicle meant to be as how it was designed by the OEM and save the headaches & heartaches.</blockquote>

Verification

The Marketplace Latest

Mitsubishi lancer Evo x front bumper
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
Proton S70 body kit
- Started by jeff6126
- Exterior and Body
Proton saga BLM body kit
- Started by jeff6126
- Exterior and Body
Perodua bezza ~accident repair
- Started by jeff6126
- Exterior and Body
Mercedes Benz W205 C-class GT grille
- Started by jeff6126
- Exterior and Body
BMW E90 ~brake caliper spray ~rim spray
- Started by jeff6126
- Exterior and Body
Honda city gm6 FL front bumper
- Started by jeff6126
- Exterior and Body
original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

B Series Intake on a 4G9X ....adaptor flange

This is old stuff that raised some question by my zth brothers... so here are some picture which will help you DIY.....

Help needed !!!

My lady got banged yesterday by a car at my driver side .... and my rims got dented very badly so does anybody know where can i get a second hand VOLK GT-C TOP SECRET RIMS... for front and back ... ??

Automatic Transaxle Fluid (ATF-SPIII & ATF-SPII)

Hello guys.

Can someone please confirm this statements:

1. SPIII is a new ATF formulation that provides thefollowing improvements to SPII and SPII-M.

2. SPII and SPIII are compatible and can be mixed in any...