Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="kaminari" data-source="post: 4348023" data-attributes="member: 100">Seems I`m bit free today, so i think should do bit write up here...haha. <img src="https://zerotohundred.com/forums/styles/default/xenforo/smilies/biggrin.gif"  class="smilie" loading="lazy" alt=":biggrin:" title="Biggrin    :biggrin:" data-shortname=":biggrin:" />N1 Oil Pump no doubt already being proved in Super Taikyuu and 24Hour Nur Race and if saying about HP rating, STD BNR34 NUR output is 450HP (with ECU tune & bigger exhaust system) meanwhile Super Taikyuu BNR34 rated over 480PS (473HP). Clearly N1 Oil Pump will support engine HP up to 500HP.The design for the N1 Oil Pump especially from BNR34 is different from BNR32/BCNR33(Duo Centric Gear Type) which using AFC Rotor.This slightly increase the volume of oil compare BNR32/BCNR33oil pump.What`s the hint of Super Taikyuu Oil Pump?Yes they using same N1 Oil Pump and the only different is the gear material which being made from strengthen material SCM430H. If you keen to convert into this gear, REIMAX got sell it. :)I would say N1 oil pump is best moderate oil pump which can save a lot of your bucks $$ to convert oiling system. High end oil pump like JUN/HKS needing you to change bigger oil sump,oil restrictor and also oil return flow.Below attach you guys the flow rate of FAMOUS RB Oil Pumps : <img src="https://zerotohundred.com/forums/styles/default/xenforo/smilies/biggrin.gif"  class="smilie" loading="lazy" alt=":biggrin:" title="Biggrin    :biggrin:" data-shortname=":biggrin:" />1) NISMO Oil Pump, at 6000RPM 47L/min *SCM430H Gear2) NITTO Oil Pump, at 7000RPM 64.8L (6k RPM est 55.5L/min) * Australia made3) TOMEI Oil Pump, at 6000RPM 56L/min4) JUN Oil Pump, at 6000RPM 58.9L/min5) HKS Oil Pump, at 6000RPM 65L/min6) REIMAX Oil Pump, at 6000RPM 70L/min * Previously crafted oil pumps for GREDDYIf flow rate over 50L/min rate...it`s recommended to change your oil sump for bigger ones....if not they will SUCKS your oil till DRY~heeeRegardsTom</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Adaptronic ECU

Another standalone ECU that worth to consider. Check out the ECU software and it capable to handle many tyre engine.

Anyone try it before and any feedback?

DIY Batteryless SmartTag

I'm sure many people already done this.

But here is how I did it.

Prepare the parts :- a 9V IC regulator. ***7809, 2 pcs of 100uF/16V e.capacitors, and a heatsink and pcb.
http://images.fotopic.net/yq8a5f.jpg

Then...

Yoko Advan AD07 Neova

I hv a set of used 235 17/45 AD07, tread ware still left around 70-80%. A pc for RM 200 only, buzz me if interested at 019 3355 479 steve