Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="1JZtezza" data-source="post: 3427820" data-attributes="member: 66560">twin webers were for the 'old' 16valve but would theoretically be posibble for the 20valve since they got the 4 throttle manifold but you would need an ECU to match fuel with the vvti function.I think it was the HKS crank with special short skirt pistons while still retaining 4age block --NOT 7AG/AF sorry for the mislead here.Timing belt-was using 'old' 16valve belt.If using 7ag block make sure u count the teeth on belt and pulley (cam turns half the speed of crank)dont think you could use 304/304 cams WITH vvti--nightmare for cam setting.But if u want 11000 rpm u gotta use 304/304 ( high lift and not standard lift-11mm I think).Pulls from 5000rpm all the way to 10000rpm in a blink.PISTON HEAD AND VALVE CLEARANCE IS CRITICAL-else you will just destroy a lot of effort and money before having the chance to enjoy itIf you are stuck in traffic jam with such configuration then better be expert in heel/toe to keep the engine alive!!!Again good luck and keep posting here.I am keen to know the outcomeBump: Also a nicely balanced engine can do high revs-corolla 4K engine with pushrods have done 9000 rpmBump: Also a nicely balanced engine can do high revs-corolla 4K engine with pushrods have done 9000 rpm</blockquote>

Verification

The Marketplace Latest

original rare Yokohama ADVAN Racing RG3 18x8 18x8.5...
- Started by david tao
- Chassis and Wheels
original Endless M4 S2 4pot 2pot brake caliper set...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG2 17x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare WedsSport TC005 17x7jj offset +40 5H...
- Started by david tao
- Chassis and Wheels
Vifa Speakers Audison Amp
- Started by samuel118
- ICE -In Car Entertainment
original rare Yokohama ADVAN Racing RG3 18x8.5...
- Started by david tao
- Chassis and Wheels
Carbing R35 GTR GTR35 Brake Master Cylinder Stopper
- Started by aycy
- Engine and Performance
GR Corolla Hypertune Bolt On Intercooler
- Started by aycy
- Engine and Performance
Carbing Radiator Reservoir Tank Honda Civic Type R FL5
- Started by aycy
- Engine and Performance
R35 GTR GTR35 Rim Wheel TE37 Track Edition
- Started by aycy
- Chassis and Wheels

Posts refresh every 5 minutes

Want to Buy Injectors altezza

Dear all

I am looking to buy injectors from altezza (OEM). If you have a set up for sell, kindly PM me with your offer.

Thanks.

DIY Microcompressor @ Mini Turbo

This is kind of air booster, it keep extra air in the black thing....so when u revv,instead of sucking hard for fresh air.it wil easily get air from there. aftermarket air booster is way too expensive, so DIY is...

Price survey till 15th July 2004

Hv not been to half cut shop for quite sometime.

Just want to survey some force induction half cut price till today.

Anyone can roughly tell me the price for the half cut for

1) Mitsubishi
2) Toyota
3) Daihatsu
4)...