WTK:AE110 Manual to Electric AC Controls Conversion

[Ronaldo95163]

Has this ever been done before?
I really like the electric controls but how difficult is it to convert to from the manual controls?
Is is just installing the servos and running the necessary wiring?

Will the existing temperature and speed control wiring still be compatible as well?


This is what I want to convert to:
https://img03.carview.co.jp/trade/img06/cars/504713/11676134/japan%20car/1997+toyota+corolla+sedan/09.jpg

A closer look:

https://img03.carview.co.jp/trade/img06/cars/1426977/12528555/1998+toyota+corolla+sedan/16.jpg

This is what I want to convert from:

https://img03.carview.co.jp/trade/img06/cars/531389/12869175/japan%20car/2000+toyota+sprinter+sedan/11.jpg


Thanks in advance.

 

[vr2turbo]

Firstly, welcome to ZTH forum in Malaysia.
Are you buying a half cut? If yes, you need to transfer everything to be safe. I did for mine when I did my engine transplant, wire harness and whatever controls I needed. Mine was manual control for air con, now is digital and push buttons....

 

[loose_end]

Manual better la

 

[sweelt]

Make sure get complete set if can source it.
So to maintain the functional air-con.

 

[Ronaldo95163]

Woa thanks guys...been a bit busy.

Haven't been able to find a complete front cut yet.
Best i've found were complete dashboard harnesses on ebay.
Not sure how difficult it would be to source the servo motors.