Hotbits Exhaust System

[EnochKeng]

Hi Guys,

Anyone here know where can I get Hotbtis Exhaust System in Johor Bahru?

 

[chaser288]

visworks,or you buy direct from speedworks

 

[EnochKeng]

Any other than Visworks?
Is Visworks related to Speedworks?
Previously there was a Speedworks in JB, but maybe due to bad businesses they closed down.

 

[deliquent]

for what car u gonna install it bro?

 

[stix]

if possible, please do check their welding, its not so great.

 

[kaderAE101]

if possible, please do check their welding, its not so great.

Hi Bro .. then which brand is good quality.. which shop to buy from ?? there are so many choices very confusing..:hmmmm: I'm looking for wira 1.5 injection.. Thanks

 

[EnochKeng]

for what car u gonna install it bro?

Hi, my ride is a LMSS Iswara 4G13..planning to upgrade my exhaust.. :)

---------- Post added at 08:58 AM ---------- 6 hour anti-bump limit - Previous post was at 08:54 AM ----------

if possible, please do check their welding, its not so great.

I assume u are talking about the exhaust finishing, cuz for what i know is bolt on (plug n play) exhaust system
If paying more than 1k +++ near to 2k for a exhaust system that doesn't have the quality for that price range, I rather get cap ayam piping and muffler..
I found out that the exhaust was imported from Australia "Made in Australia" tag? OR made in malaysia but printed australia?

---------- Post added at 08:59 AM ---------- 6 hour anti-bump limit - Previous post was at 08:58 AM ----------

Btw, anywhere else I can get Hotbits in Johor Bahru area? Thanks alot :)

 

[ettm_14]

the boxes and resonators are made in australia, however the pipings are mandrel bent in Malaysia itself

 

[beatnik]

speedworks exhaust ok la.. the bullet/resonator is particularly good.. sound not too loud.. but for similar price, can buy hafkat JDM exhaust and custom piping.. more syiok!

 

[amrancharger]

not trying to disturb anyone's good business.

but just wanna share my fair bits of experience using hotbits set up.

where i cannot pass thru road bumps, parking ramps etc when i lowered the car.even with 2 people in the car.
have to cut the hotbits piping and replace it to increase the exhaust piping.

dats not the end...recently the extractor cracked.

The journey begins: Update on Hotbits Header/ Extractor

they might have improved but i m not goin for hotbits anymore.
now need to save money again to custom a new exhaust for my ride...

 

[EnochKeng]

not trying to disturb anyone's good business.

but just wanna share my fair bits of experience using hotbits set up.

where i cannot pass thru road bumps, parking ramps etc when i lowered the car.even with 2 people in the car.
have to cut the hotbits piping and replace it to increase the exhaust piping.

dats not the end...recently the extractor cracked.

The journey begins: Update on Hotbits Header/ Extractor

they might have improved but i m not goin for hotbits anymore.
now need to save money again to custom a new exhaust for my ride...

Bro, 1st of all I am really sorry for your exhaust and the car..
This is what I hate utmost when we pay the price so high and the product we received are not worth event a half of it.
Thx for the advice :)

 

[amrancharger]

i was confused...
read damn good review in the local mags for hotbits exhaust using their coilover for perodua viva.
So I tot it shud serve its purpose for my daily driven car.

i was tinking...how did it manage to get thru bumps and ramps during the r&d?

tot i was buying a hassle free solution…never tot dis cud happened.
I heard all about HB cracked extractor, but never want to believe it coz its all from 3rd party info…

However, I have to admit, while using the exhaust…there is improvement.
Just dat I find it to be expensive wif the marketing hype.
And a couple of years life usage is abit too short for something wif this price tag. :(

 

[EnochKeng]

i was confused...
read damn good review in the local mags for hotbits exhaust using their coilover for perodua viva.
So I tot it shud serve its purpose for my daily driven car.

i was tinking...how did it manage to get thru bumps and ramps during the r&d?

tot i was buying a hassle free solution…never tot dis cud happened.
I heard all about HB cracked extractor, but never want to believe it coz its all from 3rd party info…

However, I have to admit, while using the exhaust…there is improvement.
Just dat I find it to be expensive wif the marketing hype.
And a couple of years life usage is abit too short for something wif this price tag. :(

The current Hotbits exhaust has increase 50% on the price tag. I remember 1 year back the price was RM980 for a full set of exhaust system for Iswara. But currently the price has increase to near RM1700 + for a full set. That is a lot. With the quality given, I do not think it is worth it at all. JDM exhaust can last so many years why not hotbits. :hmmmm:

 

[stix]

Yes, the finishing is not something i would praise.for my car its plug and play..to THEIR own exhaust system, not my original stock piping.if you are looking for branded quality look elsewhere.superstreet makes excellent extractors for a price.another option is to search for kweng84 in this forum.his stuff is good.

Would i buy hotbits again? No.i'd opt for supercircuit.

 

[ACQ2305]

Yes, the finishing is not something i would praise.for my car its plug and play..to THEIR own exhaust system, not my original stock piping.if you are looking for branded quality look elsewhere.superstreet makes excellent extractors for a price.another option is to search for kweng84 in this forum.his stuff is good.

Would i buy hotbits again? No.i'd opt for supercircuit.

But is kweng proven? power and stuff.. at least from feedbacks, hotbits is proven..
but finishing,it is nice..

 

[infinity.melvin]

kwengs exhaust 3years warranty. anything not happy, just go back and get it fixed.
so far so good for me :)

 

[dude_i_lost_my_car]

eh..... eno i was using hotbits since 2007 till i sold my se early this year wira se ( u should know who am i lol)........

 

[EnochKeng]

eh..... eno i was using hotbits since 2007 till i sold my se early this year wira se ( u should know who am i lol)........

Dude I thought u lost your car? LOL hahaha how is ur EVO X?

Btw, I gave up on hotbits price hike again! increases like nobody business..Btw my setup now is quite satisfying for myself..whole piping same size, from header to tail 1.5 inch..Marco header, Silencer bullet and Matola rear section with straight flow similar to WiSE, so far so good, good power deliver and good bass sound..

 

[upontheriversky]

let me know if ur auto or manual, engine peak torque rpm and peak hp rpm. give me ur engine exhaust open bbdc degree, current header length and rpm u usually play around with and ill propose a design and u can go and custom it. it will perform way better than hotbits at fraction of the price :D

i personally think hotbits are highly influenced by profit, i dont think they did extensive R&D to sell their exhaust at that kind of price. their target audience might probly be those who think "if its expensive, it must be really good"