Gauging interest on plasti dip

Gauging Interest : Which Plasti Dip Color Would You Prefer And What Would You Dip?

  • Blaze Blue

    Votes: 1 33.3%
  • Blaze Green

    Votes: 0 0.0%
  • Blaze Orange

    Votes: 0 0.0%
  • Blaze Pink

    Votes: 0 0.0%
  • Blaze Purple

    Votes: 0 0.0%
  • Blaze Yellow

    Votes: 0 0.0%
  • Base White

    Votes: 0 0.0%
  • Base Red

    Votes: 0 0.0%
  • Base Black

    Votes: 2 66.7%
  • Smoke!

    Votes: 0 0.0%
  • Gun Metal

    Votes: 1 33.3%
  • Camo Black

    Votes: 1 33.3%
  • Camo Brown

    Votes: 0 0.0%
  • Camo Tan

    Votes: 0 0.0%
  • Camo Green

    Votes: 0 0.0%

  • Total voters
    3
Hmmm ok..learnt new thing wakakakaka..

Btw, I found this:
[Up to 63% Off] Lightweight Air-Pressure Paint Gun from RM118. Free Delivery to Pen. M'sia

Don't knw if it is good enough?:hmmmm:

Yes, that's the only thing I found so far for a paint spray gun. Can't get the one Fonzie use as they do not ship to Malaysia. Even there is one who is willing to ship from US but it aint cheap.

This would be a cheaper Alternatives. Was waiting for such promotion but budget a bit tight.
 
Suddenly so many comments! Haha. Last week Thursday I bought at Ikano. I thought no stock at their usual shelf but i asked them, they said look up. Sooooooooo manyyyyyyyy. Now, not sure la.
 
Last edited:
I go there Sapu then, can put up a stall at Pasar Malam, do demo there then sell RM50 per can :rofl: Who want me do on the spot, RM200 depending on size and time used :laugh:

But 1 thing I want to ask bro Pocket Rocket, if sprayed rims, will our dip be damaged by foreman
when want to change tyre or do alignment & balancing? Since they are gonna use the air gun to
take the nuts out. Usually my rims so far all okay la, just afraid some may be too rough.

Then have to do all over again..

Whether air gun or manual spanner, got to see how the tyre man open the nuts. As long as careful not to scrap the rims then okay, but you got to tell them every time...

---------- Post added at 10:54 PM ---------- 6 hour anti-bump limit - Previous post was at 10:52 PM ----------

Lol then if raining...habis...wakakaka

I think if on rims...when the foreman wana take our the old tyre that time the will use a metal rod to slip into in between tyre and rim to take the tyre out. That might hurt the dip as well.

That is why even people who sent for rims respray I will suggest they don't spray the edge of the rims, as that area can be easier damaged when fitting and removing the tyres

---------- Post added at 10:54 PM ---------- 6 hour anti-bump limit - Previous post was at 10:54 PM ----------

Hmmm ok..learnt new thing wakakakaka..

Btw, I found this:
[Up to 63% Off] Lightweight Air-Pressure Paint Gun from RM118. Free Delivery to Pen. M'sia

Don't knw if it is good enough?:hmmmm:

I saw that too, but not sure of the spray strength?

---------- Post added at 10:55 PM ---------- 6 hour anti-bump limit - Previous post was at 10:54 PM ----------

OMG.. I WANNNN... *place order*

Edit - If this spray gun works for me, I'mma chargin' RM100 rental fee for anyone who wants to borrow :biggrin:

Fuyoh! RM100 rental, might as well buy one....:biggrin:
 
Izso, thanks for the offer, but i would rather buy 1 that cost RM18 extra to try it all I want and still able to keep it after using :biggrin:
 
Correct me if Im wrong but I think that spray is similiar to the one in the link below, suitable only for waterbased and varnish paint guys.


http://www.ebay.com.au/itm/Paint-Zoom-Professional-Electric-Sprayer-Spray-Gun-Garden-Fence-Home-Warehouse-/321072270990?_trksid=p2045573.m2042&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D27%26meid%3D6542918768795747986%26pid%3D100033%26prg%3D1011%26rk%3D3%26sd%3D350732058056%26
 
You might be right. But for that price I'm willing to take the risk.

Worst comes to worse I clean the nozzle and use to spray my house instead.
 
Correct me if Im wrong but I think that spray is similiar to the one in the link below, suitable only for waterbased and varnish paint guys.


http://www.ebay.com.au/itm/Paint-Zoom-Professional-Electric-Sprayer-Spray-Gun-Garden-Fence-Home-Warehouse-/321072270990?_trksid=p2045573.m2042&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D27%26meid%3D6542918768795747986%26pid%3D100033%26prg%3D1011%26rk%3D3%26sd%3D350732058056%26

That was what I was afraid about.....:hmmmm:
 
Correct me if Im wrong but I think that spray is similiar to the one in the link below, suitable only for waterbased and varnish paint guys.


http://www.ebay.com.au/itm/Paint-Zoom-Professional-Electric-Sprayer-Spray-Gun-Garden-Fence-Home-Warehouse-/321072270990?_trksid=p2045573.m2042&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D27%26meid%3D6542918768795747986%26pid%3D100033%26prg%3D1011%26rk%3D3%26sd%3D350732058056%26

Yes is similar, in groupon and other coupon website who sold this before did describe that is suitable for any paint, chemicals and etcs. So I think it will work. The only thing is the results of the finish job. If it can paint houses nicely, I think it fits just fine.

You might be right. But for that price I'm willing to take the risk.

Worst comes to worse I clean the nozzle and use to spray my house instead.

That was what I was afraid about.....:hmmmm:

Agree about that, I dare to take the risk for something that cost RM118 and I have no lost even if it did not work for Plastidip paint, but since is paint, I think it will be fine and worth trying.

I can use it to paint the house like Izso mentioned. Better than getting my hand or messy with paint all over. :biggrin:
 
Use it to flower plants...lol...or bathe dog hahaha

I think it should work...just that the nozzle has to be kept clean.
 
Use it to flower plants...lol...or bathe dog hahaha

I think it should work...just that the nozzle has to be kept clean.

Spray flower if u say spray pesticide okay la, if spray water, not sure how many times u need to refill :rofl:
 
Yes is similar, in groupon and other coupon website who sold this before did describe that is suitable for any paint, chemicals and etcs. So I think it will work. The only thing is the results of the finish job. If it can paint houses nicely, I think it fits just fine.





Agree about that, I dare to take the risk for something that cost RM118 and I have no lost even if it did not work for Plastidip paint, but since is paint, I think it will be fine and worth trying.

I can use it to paint the house like Izso mentioned. Better than getting my hand or messy with paint all over. :biggrin:
Cleaning the unit can be messy too......:hmmmm:

---------- Post added at 01:41 PM ---------- 6 hour anti-bump limit - Previous post was at 01:40 PM ----------

Spray flower if u say spray pesticide okay la, if spray water, not sure how many times u need to refill :rofl:

Oh! Maybe can use for that. I only have a manual spray now.....:biggrin:
 
Careful what you buy on groupon or all the other pons... try to read the fine printing, it will normally say, "Item sold is a replica of the video demo." Means they are 3rd party fake-o's and performs half of what the ori is. I bought dog car mat, garden hose spray, hand held steam iron and few other rubbish... proved worthless and a waste of money.

About the dipped wheels, I would do all my setup and lastly dip the wheels and leave it for a very long time. like the finishing touches, try to organize a time frame cuz the dip will stay there as long as you dont have hard force on it. my wheels still fine and dandy.. minute chips but not growing. Even if i dip it once a year its still worth it! I'll prolly do it again and this time dip all 4 wheels, now is front dipped and rear ori matte black.
 
Cleaning the unit can be messy too......:hmmmm:

---------- Post added at 01:41 PM ---------- 6 hour anti-bump limit - Previous post was at 01:40 PM ----------



Oh! Maybe can use for that. I only have a manual spray now.....:biggrin:

Seems hard to clean from what I was told, since is Rubber.
 
guys, wanna ask. I plastic dip my grill last week, but i was abit messy. because i didnt maskin tape those unwanted area. Now i have a few mist here and there.. on my bumper.. How do i clean that up?
 
guys, wanna ask. I plastic dip my grill last week, but i was abit messy. because i didnt maskin tape those unwanted area. Now i have a few mist here and there.. on my bumper.. How do i clean that up?

Use a wet cloth all just use your finger to rub that part of...it will come out eventually. Or you may leave it if is not obvious. After a few car wash with rubbing here and there, it will come off. But of
course recommended to do it yourself than rely on others.
 
Use a wet cloth all just use your finger to rub that part of...it will come out eventually. Or you may leave it if is not obvious. After a few car wash with rubbing here and there, it will come off. But of
course recommended to do it yourself than rely on others.

Ha!, expert already.....:adore:
 

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience