340hp VTEC DRAG RACE ENGINE F/S

[crvef8]

As the title says here is the dyno and what the engine looks like. If you are interested sms or call me on 012 335 2226.

This engine is brand new and has never been installed in any car. Engine was built a while back for the NHRA but due to changes in the regulation was never used.

Engine has been dyno tuned and broken in therefore its a crate engine ready to go into any drag race car. HP on engine - 340HP, Torque - 22 5lb ft

Now if you want it i can arrange for it to be shipped back to Malaysia.

WARNING :- This is not a road engine and should only be used on a drag strip.

Engine Spec:-

Sleeved Block:-
98 X 84.5 Bore & stroke in a sleeved blocked.

Head work
Full Pro Race Ported head with
High Comp Valves

RACE FUEL ONLY !

Block comes Complete - without Extractors & Intake manifold. But we can arrange for the intake if you need it.
SMS Me for more questions.

 

[Gtiiiii_01]

That engine looks really good! Free bump!

 

[crvef8]

For more details please sms me and i'll call you back. Not revealing so much as i want to keep privacy for the people who wants to buy this.

---------- Post added at 05:10 PM ---------- Previous post was at 05:00 PM ----------

That engine looks really good! Free bump!

Thanks for the bump.

 

[crvef8]

Thanks for the Bump...

 

[crvef8]

Monster Vtec Engine anyone?

 

[hornydrifter]

hail the monster!!!!

 

[crvef8]

All Hail ... Hope to bring this into Malaysia...

 

[crvef8]

Thanks for the bump

 

[crvef8]

up to the top

 

[crvef8]

The engine has only had 4 dyno pulls and everything put in is new...

 

[kroolada]

hi bro , if itb only wanna sell , can sms me the price for twm 50 or 52mm ?
interested here 017 6917136

 

[crvef8]

Morning Bump. i'll check for you but give me a day or 2. I just sold my 50MM sigh...

What head are you using?

 

[crvef8]

12345

 

[kroolada]

Morning Bump. i'll check for you but give me a day or 2. I just sold my 50MM sigh...

What head are you using?

crv b20b head bro..........all motor non-vtec
ur twm also i want to buy but ur workshop already bought from u

 

[crvef8]

HEHeh no worries bro. If you not running a vtec head then i would advice against this 52mm Itb cause it will probably be too much for that head. What i can do is try to look out for other smaller sizes ITB maybe 48 or 50 mm. What say you? Better to SMS me bro. K?

 

[crvef8]

Should be looking @ Close to 300 on Wheels depending on gears and ration and how new the gears are.

 

[crvef8]

BOOM back up

 

[crvef8]

Killer engine.

 

[crvef8]

Major Engine works

 

[crvef8]

No One needs a killer power engine.