Hydrolocked Neo CPS now under going some internal mods

[jpoplover]

Stable vacuum level is a good sign for good compression and no abnormal leak over the piston rings.
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs090.ash2/37833_138983006124276_100000377312513_251981_3904949_n.jpg

Water temperature after a series of hard running-in drive. Healthy.
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs190.snc4/37833_138983009457609_100000377312513_251982_4318805_n.jpg

Engine oil temperature after a series of hard running-in drive. Healthy.
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs190.snc4/37833_138983012790942_100000377312513_251983_2140691_n.jpg

Did about 40km so far. This was taken at exactly 20km from the 'resuscitation'.
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs190.snc4/37833_138983016124275_100000377312513_251984_6924711_n.jpg

Finally, discharged from the hospital.
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs112.ash2/38963_138985996123977_100000377312513_251990_1874601_n.jpg

very details, nice...

 

[drexchan]

rm3000 oni. consider cheap. how about labour charge? 0.1mm, how to measure? now is rainning season, for who have CAI, pls be careful

Labour included. Crank deformality can be detected once it's on the balancing jig, not by naked eyes or any hand-held measuring tools.

 

[0382]

em... dynamic balancing

 

[drexchan]

em... dynamic balancing

exactly.

 

[TitanRev]

Drex, if the crank shaft is still good so the cost will be less than 3K with the labour included loh...not a bad price.

I sense that the engine could still have more internal upgrades. Drex what else can be upgraded if 1 choose to do this? I mean what other available parts that 1 can still put in during the rebuilding process. Rods, bearings.etc

 

[0382]

for bottom end you may do the dynamic and static balancing for crankshaft, conrod, piston n the ring and maybe can use floating piston pin if the machine-shop know how to make/machining it...
at last use racing bearing for conrod n main if available la...

 

[klywh1]

Kudos Drex another great job from EA =) now I know what 2nd car I will buy for next project haha

 

[drexchan]

for bottom end you may do the dynamic and static balancing for crankshaft, conrod, piston n the ring and maybe can use floating piston pin if the machine-shop know how to make/machining it...
at last use racing bearing for conrod n main if available la...

item highlighted: done
floating piston pin: risky
racing bearing: not so critical for daily-use car.

 

[xbalance2002]

Drex,
how is the Dyno result? by the way is stock injector is good enough? or need to upgrade.

 

[drexchan]

Drex,
how is the Dyno result? by the way is stock injector is good enough? or need to upgrade.

Not even 1000km yet. Need to run-in first.

Stock fueling system + FPR good enough, only 43cc bigger, divided by 4 cylinders, not much larger.

 

[drexchan]

Flushed the engine lubricant and replaced the oil filter few days ago. It's getting smoother everyday. Time for a dyno chart..

 

[TitanRev]

Drex, why do you say floating pin is risky? mind sharing the cons of it?

 

[drexchan]

Drex, why do you say floating pin is risky? mind sharing the cons of it?

I didn't really mean that it's risky. But it takes a very precise machining skill to get the depth and width right. The holes on the piston also needs to be enlarged, while the piston pin needs to be grooved. The lock pin also has be has similar heat expansion.

If it's manufactured that way, absolutely no issue. But I don't feel peace using a modified one.

 

[TitanRev]

thanks for the info bro...will be waiting for the dyno soon...

 

[drexchan]

wow, where are these mods and repairs done??? Maddriver garage????

Sudah bangun belum?

EA AUTOWORKS, Aked Esplanad BUkit Jalil.

 

[papagoines]

Sudah bangun belum?

EA AUTOWORKS, Aked Esplanad BUkit Jalil.

waa... i tot EA only an accessory shop (a very good one, mind you )!...

only bought 1 product (a stebel horn).... never imagine you guys can go this far...

kudos :top:

 

[ldhong]

that's why i also thought only bernard famous in engine rebuilt nvr thought EA can go this far even after open for 1 year.....

 

[drexchan]

NOW THAT WE HAVE GOT YOUR ATTENTION.

Anyway, our sign board doesn't say "kedai aksesori kereta". It says "Pusat Audio & Prestasi".

http://images.fotopic.net/y0pkx1.jpg

 

[^pomen_GTR^]

hik hik hik...


hurry hurry..dyno chart reading....

 

[drexchan]

The owner pandai-pandai went upgraded his camshaft before sending the car for a dyno test..

Even if we dyno the car later, the information wouldn't be useful to us already. :(