newbie need advice

[Ashyie_Ferio]

hey. im new here. driving a honda civic eg8.
could use a few pointers on how to up the performance of my car.
any opinions would be great.
p/s. complete noob here.

 

[JINEIL2EN]

B18C Type-R engine with 4.785 gb, Jun4 high cam, Skunk 2 Pro Cam pulley, Wiseco 84mm 12.5 piston, ACL bearing, Ferrea Ti-Valve, Mugen N1 Vlv-Spring, Ferrea Ti-Retainer, Toda Vlv Guide, Viton Vlv seal, 84mm Darton slv, +20% PNP, ARP stud, Clockswise Motion roller 4 throttle system, Power Ent belt set, AEM direct ign-kit, fully balancing crank, Duratech rod, Unorthodox racing pulley kit, Cusco engine mounting, Denso Iri, SMSP 4-2-1(2.75"), Amuse Titan1000 ex system & Hondata S300.

if u buy all of the above, ur car will b 1 of the best in malaysia & singapore...

 

[Ashyie_Ferio]

holy cow...
that surely cost 30K++
me student only maa.
wana go slow...
so far okay...
can go 160 no problem. a bit noisy la..
n bumpy.
wana upgrade as i go along..
sad to admit, im a greedy driver.
want evrything in my car.
nice ICE, fast, buat also comfortable.
hahahaha.
any suggestions?

 

[EvolutionZ]

cheapest way for a little extra ommph..
plug wire, plug, exhaust, extractor, sport spring, open pod filter....u will feel a little kick...
after that, u go with the advice from jin....cheerz

 

[arturo]

B18C Type-R engine with 4.785 gb, Jun4 high cam, Skunk 2 Pro Cam pulley, Wiseco 84mm 12.5 piston, ACL bearing, Ferrea Ti-Valve, Mugen N1 Vlv-Spring, Ferrea Ti-Retainer, Toda Vlv Guide, Viton Vlv seal, 84mm Darton slv, +20% PNP, ARP stud, Clockswise Motion roller 4 throttle system, Power Ent belt set, AEM direct ign-kit, fully balancing crank, Duratech rod, Unorthodox racing pulley kit, Cusco engine mounting, Denso Iri, SMSP 4-2-1(2.75"), Amuse Titan1000 ex system & Hondata S300.

if u buy all of the above, ur car will b 1 of the best in malaysia & singapore...

i read oso scared....

 

[xtremeleo]

i read oso scared....

well, he did asked for a spec, lol. to the thread starter, if u can be more specified in what u r aiming for, whats ur limit / budget, maybe sum of us can give a sound-er advice sir.

now dat i know u r a student, my first advice is, keep ur car std jer.. save ur money for sumthing better in the future sir

 

[Ashyie_Ferio]

well, he did asked for a spec, lol. to the thread starter, if u can be more specified in what u r aiming for, whats ur limit / budget, maybe sum of us can give a sound-er advice sir.

now dat i know u r a student, my first advice is, keep ur car std jer.. save ur money for sumthing better in the future sir

point taken. my bad there.
yeah. im kinda attached to this car, dont think will get another car.
what im looking for is smoother ride when im going faster.
yesterday went up to 170, but the engine got noisy eventhough the rpm still not at maximum yet.
normal ah?
i have about 5 k to spend.
recently did ICE and tinting for 2k.
leftover going to performance n comfort.
performance i think just gonna change to k&n pod air filter then exhaust.

 

[JINEIL2EN]

holy cow...
that surely cost 30K++
me student only maa.
wana go slow...
so far okay...
can go 160 no problem. a bit noisy la..
n bumpy.
wana upgrade as i go along..
sad to admit, im a greedy driver.
want evrything in my car.
nice ICE, fast, buat also comfortable.
hahahaha.
any suggestions?

bout rm70k++ bro...

i read oso scared....

scared wat>??? too low spec for u..?? sorry bro, my bad... i dunno wat is high spec 1...

 

[arturo]

Jin...i scared cos i know i will never attain such hi specs...where to pasang Ferrea Ti-Valve oso i have no idea ,

Ashyie...u keep the list jin posted up ok. when u collected 70k...u contact him again n get him to guide u. quarantee yr EG will be fastest in SGP,Malaysia and some say Batam

Jin is Vtec grandmaster u know!

 

[JINEIL2EN]

sorry bro... i'm just a noobie in performance... i dunno wat is the best for power, but for brand, i know la... hahahaha....

 

[arrowhead]

sorry bro... i'm just a noobie in performance... i dunno wat is the best for power, but for brand, i know la... hahahaha....

dun be humble pls! everyone here knows who u are!

 

[Ashyie_Ferio]

Jin...i scared cos i know i will never attain such hi specs...where to pasang Ferrea Ti-Valve oso i have no idea ,

Ashyie...u keep the list jin posted up ok. when u collected 70k...u contact him again n get him to guide u. quarantee yr EG will be fastest in SGP,Malaysia and some say Batam

Jin is Vtec grandmaster u know!

hahaha. "some say batam." LOL
i miss phua chu kang.
hahahaha

JIN, tunjuk ajar yeah?
im gonna stick with this car for a long time.

 

[JINEIL2EN]

dun be humble pls! everyone here knows who u are!

no la... no1 know me 1 la... u salah orang dy.... hahahahaa

hahaha. "some say batam." LOL
i miss phua chu kang.
hahahaha

JIN, tunjuk ajar yeah?
im gonna stick with this car for a long time.

hahahaa... i love that line oso...
easy way, rm12k, get a DC2R engine conversion...

 

[arrowhead]

now its only 12k? damn. worth every penny!

 

[arturo]

if i had 12k i oso would go b18cR...but my original engine was a 1.5...dun think will pass puspakom... haih.

 

[Ashyie_Ferio]

wah. 12 k.
long time coming lah.
i'll get back to you in a few years.
hahahahaha

 

[JINEIL2EN]

no need, just goto Standard Charted la...

 

[ajin]

to much same question n sumtimes get bored...hahaha

 

[Ashyie_Ferio]

better off paying fees..
hahaha.
xpe2.. i do minor mods first...

ajin, alot of ppl have asked before eh?
i just joined recently. so dont know.
hahaha

 

[shah5755]

go for exhaust system mods,then go for open pod for intake system,change ur rims+tyre,suspension upgrades,cooling sytem upgrades.....i think all tat enough to empty ur 5k in pocket