4G91 Gang..

[fstr]

wai..fred taikor wan to convert edi..

alvin24 stock b4 turbo is around 90hp if not mistaken...
ijoe bore 1.6 piston got 112hp on wheel
mine wit open pod 4-2-1 n 4g93 cam got 106hp on wheel

guys...today i face 1 stupid fucking idiot prob...
i just change my enigne oil just now...yesterday went tt reach home petrol is comfirm hangus kering edi 1...light also on...just now go change engine oil also is kering kering....but after change oil i c my fuel meter got half tank sumore...i super duper comfirm i didnt go pump petrol mah...y goes up by itself 1..??????

oh mayb eneos oil is so so good changing oil alone comes wit free petrol???
jk jk :P

got 106 on da wheel also ok d wor...wen mau drag with me car nia... ehehhehehehe.. :angel_smile:

 

[LancerTerabo]

Back from undead

got 106 on da wheel also ok d wor...wen mau drag with me car nia... ehehhehehehe.. :angel_smile:

waaah... nowday uncle fred oso join this tread kaaa? wanna change his engine summo... shock la weee...

uncle fred... long time no see you... hows your satria... y seeking for 4g91? that day u told me 4g9x base not sutable for power convertion as 4g6x

oops... hi guys... how our gang how? dun have time to login ar... even dun have time to read prev tread...

 

[ijoe]

finally my car finish alrady...all problem alrdy been kawtim! but it cost me boom!
ah yoong will running in my car on mnday to see is any othr problem prsesist! hopefully not! so if ok then i can drive my car on tuesday! myb we can hv out TT this firday! keh..keh..keh

 

[wirafly]

finally my car finish alrady...all problem alrdy been kawtim! but it cost me boom!
ah yoong will running in my car on mnday to see is any othr problem prsesist! hopefully not! so if ok then i can drive my car on tuesday! myb we can hv out TT this firday! keh..keh..keh

:_: , nice to hear that! how the engine response? good? and how much to cost you invest on this project?

 

[ijoe]

i still dont drive it yet! leave for running & testing for this whole day...if no problem then can take my car tdy....when rev the response very good...but on road still dont know ! want to test it tdy....cost dont know yet! he just said 'alaa....dalam satu ribu lebih..lebih la...' pergh!! dont know that cost covering what....tday will know la...keh..keh..kehh....but most important thing! my engine supposed in good condition! he...he....myb berkat friend prey kot!

 

[ayell]

Congratulations ijoe.. can we test drive ur car arrr? hehehheh

 

[tajulsans]

Ijoe,

good to hear that man.. cant wait to have a go in ur car.. hahaha.

 

[fstr]

waaah... nowday uncle fred oso join this tread kaaa? wanna change his engine summo... shock la weee...

uncle fred... long time no see you... hows your satria... y seeking for 4g91? that day u told me 4g9x base not sutable for power convertion as 4g6x

oops... hi guys... how our gang how? dun have time to login ar... even dun have time to read prev tread...

terabo daikor, ahahahhaha hows life la bro? ur lancer ok or not?? no go play D1 mehh? :p

me no tukar 4g91 ler, tarak duit beb... :p

 

[partyJOE]

cpmah... TPS have to adjust abit....
i using 60mm mivec TB on my 7375 ECU...
ISC kong aredy.... so opt to FICD....
idling on/off aircond damn cun!!!....
ah yoong mech is in bdr tasik selatan there....
ijoe can take u there...
i got post a map sumwhr in this thread b4....
will try 2 find 4u later...

 

[partyJOE]

wah ijoe monster is out ha....
gud gud.... cant wait to c it... sure more umppphhhh 1...

 

[fadlie]

If wanna change to manual tranny..

Gearbox F5M211 = RM 300 - 500
Gearbox F5M222 = RM 600 - 1000

Flywheel = RM 100
Clutch kit = RM 200 - 400

Clutch master pump = RM 100

Pedals = RM 150

Drive shaft = RM 100

Installation = RM 100

Gear Oil = RM 30

All in all is around 1k++ loh..

wah tajul...quite cheap lah the installation... where's the bengkel? now i only have gearbox 'kosong' and starter...dun have flywheel, driveshaft etc...etc....

 

[ijoe]

Not Monster La Dey...cam Jahat Je Bunyi Nya....keh..keh....tday Hopefully My Can Go To Spa La...rest So Long......then Have A Sprint Test....keh...keh....err...dapat Aku Punya Knock Sensor Tak???

 

[tajulsans]

wah tajul...quite cheap lah the installation... where's the bengkel? now i only have gearbox 'kosong' and starter...dun have flywheel, driveshaft etc...etc....

Hmmm, RM 100 is for gearbox onli, post wrong info oledi.. sorri2.. if together with other part maybe around 150 to 200 qua..

 

[partyJOE]

Not Monster La Dey...cam Jahat Je Bunyi Nya....keh..keh....tday Hopefully My Can Go To Spa La...rest So Long......then Have A Sprint Test....keh...keh....err...dapat Aku Punya Knock Sensor Tak???

knock sensor evo ade... 200++ ... foremen kate nak call bila dapat mivec punye...entah tak call2 lagi.... 02 sensor ape cite?... dapat tak

 

[fadlie]

Hmmm, RM 100 is for gearbox onli, post wrong info oledi.. sorri2.. if together with other part maybe around 150 to 200 qua..

200 still cheap man....my place want 300++ for installation, not worth la...

now im lookin 4 clutch pedal la...where 2 find arr? very hard to find at chop shop...

 

[tajulsans]

200 still cheap man....my place want 300++ for installation, not worth la...

now im lookin 4 clutch pedal la...where 2 find arr? very hard to find at chop shop...

I try to help u ask around.. indeed it is hard to find, when my pedal bracket broken lastime also quit hard to get and ussually they prefer to sell in a whole set..

 

[partyJOE]

FUYOOH.... gearbox instalation 300 ha.... real champion workshop....
my mech does it for 100++ only ho....

 

[ijoe]

party...o2 tu mamat tu senyap je! nanti aku try call balik! pergh!! 200 utk knock sensor...memang harga tu ke? tak pe simpan dulu...nnti kalau trdsak aku beli la....keh..keh..keh...aku nak byr hutang ah yong dulu!

itu hari kau ada bg aku logo utk sticker tu kan...boleh save file dalam jpeg dn emel kat aku tak?

 

[cpmah]

finally get my 54mm TB work on my 4G91 this sunday with the aluminiun crank pulley in as well. power wise a bit smoother, now air-con swtich on & off not so obvious already (I think is bz the crank pulley).

But one bad thing, fc a bit higher liao...wwuwuwuuwuwuwuw.

estimate with 4G91 manifold & 50mm TB is $1.63/liter

estimate with 4G93P manifold & 54mm TB is $1.75/liter

Yong,
did you do a compression test b4 in your engine? you think with your set-up. how many compression ratio should be? is it 9.5 ratio?

 

[partyJOE]

cpmah ...congrats man....
basically more air needs more fuel lar...
only then setting will be cun...
so overall wat u think abt the crank pulley...
how much of differnce does it make... pls share..thx