4G91 Gang..

[mosh]

if 16" fc wise how eh compare to 15" ? sure increase rite ? but how may percent eh ? :hmmmm:
can you really feel the diffrent ? or so-so feeling only ?

thanks

 

[ACQ2305]

16-17..no difference 4 me.. depends how heavy ur right foot is..hehehe....

 

[ayell]

petrol price already down leh.. so just go for it.. this is the time heheheheh.. later it going up again change back to 15" lah.

 

[hAz]

heheh....ya lor...me thinking of taking my dad's 16" as well...
ekekek

eyh, guys,
if we do CAI, directly at the bumper, wont it suck water if it rains heavily?

 

[mosh]

petrol price is down now.. heheh.. ya lorr...
anywy, my uncle wanna sold me the rim super cheap as $250 with new tyre heheheh..
summore his wira se is about several month old.. the last batch one..

i think im gonna fell for it it lar.. heheh..

 

[hAz]

mosh,
if i were u, id just go for it...
soo true, petrol price is low now...
hehe
summore rm250 w new tyres ar?
demm kaw2 weh...
mcm year end sale lor

 

[calvin9683]

the SE rims...
like wat others said...
its heavy...
plus to me...makes ur disc brakes looks damn mini!!!
wahahaha...
but if the price is right n suit wat u wan...
then go ahead with it...
definately will hav effect on performance and fuel consumption....
how much it effects....is for u to find out la.....

but its not all abt the bad side la...
bigger rims=wider tires=better traction....
cornering shiok ma....
heehee

abt CAI when heavy rain...
not much prob la...
like i said earlier...
but then when see HUGE puddle of water....
better dun b hero....
heehee.....

for the piping....
bigger piping=better flow=better pick up.....
no point keeping the ori piping la + modding it la...
save up a bit more n change entire piping to 2" ones....
pickup and topspeed both oso improve ma......
get those from MARCO ones.....
comes with a center bullet and nice/smooth bending follow wira ori route......
i got it 2yrs back for around RM200.......

 

[lwk3980]

hihi,i wanna enquire something... i stay in setapak, kl... did anyone know nearby got any exhaust shop?? i tot of change my pipe le... wanna change from 4-2-1 till the end muffler head. between, u all think how will it cost me now ar?? plus wat diff between manifold n extractor ar??

 

[mosh]

setapak there's a lot of exhaust shop at jln genting klang..
got 1 "gerenti tak tipu customer 1 sen pun" shop.. hehehe

 

[calvin9683]

FYI,
exhaust manifold = extractor.......

as for price...
i not sure....
been a while since i do anythin to my exhaust...
heehee

 

[prometium61]

Hello all,
This is my first post, but i have been a member for a few months. I have been reading up on older post first.

I inserted a 4G91i manual into my Iswara aeroback awal tahun ni. My problem is with endorsing the engine:
a) My engine is from another donor car. Tak ada borang kastam. Tapi, i have Registration card and sales rcpt(with cop pesuruhjaya sumpah) from old owner.
Is this ok to endorse engine? Can any of the Iswara sifus help me.
Also, my left side engine mounting had to mod to fit(body not mod). Is this ok?

Thanks all sifu's in advance.

 

[lwk3980]

thx calvin and mosh for ur information!!
haaha.. i really dunno intake manifold is extractor. learn one thing today.. but so embarrasing. wow... there is such shop name ar?? "gerenti tak tipu customer 1 sen pun" shop... i wil try to find it den. hope they really wont cheap me la.. maybe they wont cheat 1 sen but they wil for RM100++

 

[ayell]

lwk3980.. intake manifold is not extractor.. exhaust manifold is.

 

[hAz]

intake manifold is the one connected to tb right?
the one written eci multi...

 

[calvin9683]

ya haz...
u r right...
dat's the intake manifold.....

lwk....
guess bro ayell had corrected u.....
as for the exhaust shop....
i think u just go n buy motor trader...
should b able to see their ads at the last page....

prometium.....
u hav to make sure the donor car is endorsed with another engine...
then oni u can endorse ur current engine (which is his previous engine)...
my mech place got a Iswara oso just converted 4g91 around 1mth back...
no prob with the inspection with JPJ......

 

[ayell]

intake manifold is the one connected to tb right?
the one written eci multi...

nope.. the tb is the one that connected to the intake manifold...

heheh hAz.. joking only, just to make things more confusing, pardon me, me feel crazy today :stupid:

 

[prometium61]

Calvin,
Yes, donor car is endorsed. I heard its extremely difficult to get Puspakom approval nowadays.
Should i do it myself or just get runner to do? Can 'undertable' or not?
How about the engine mounting, exhaust etc?
Thanks again.

 

[ACQ2305]

cal,so its better jst 2 save n change d whle piping to a 2in rather then changing d bullet alone?? that wud b better rite?? coz i hav got myself a centre bullet,stainless steel straight flow.. but the idea of jst upgrading the whle piping gets me excited..hehehe.. now jst wana see if anybdy wants 2 buy it..got it frm kweng84.. rm200..

since were on d subject of changing one engine to another car, is it possible to,lets say i wana transplant my engine into my sisters car and get another engine for my car..
i hav already endorse my engine,91,.. my sis car is still d ori 4G15..im thinking of giving her my engine and maybe getting myself a GSR next year...at least i can still keep both..

 

[ACQ2305]

nope.. the tb is the one that connected to the intake manifold...

heheh hAz.. joking only, just to make things more confusing, pardon me, me feel crazy today :stupid:

i tot d intake manifold is the one connected to the throttle body?? or is it the other way around???..hehehehehe....

 

[calvin9683]

ACQ....
since u edi got a bullet....
y not just go exhaust shop n ask abt the piping cost???
if u r in this situation...
i suggest u dont do ori route...
do the under fuel tank route...
less complicated=cheaper......
at the same time wrap ur piping with thermal cloth......
chunted habis!!!!!

as for transplanting engine.....
1st....u hav to endorse ur new engine....
then oni ur old engine can be endorsed.....
the whole process might b confusing......
n also quite time consuming la.....

as for the tb n intake manifold.....
simple thingy la....just dat ayell purposely make u blur...
heehee....
ur air-filter connected to the MAF sensor, MAF sensor connected to the hose, then connected to ur tb, ur tb connected to ur intake manifold, ur intake manifold then lead the air and fuel into ur combusion chamber.....
y air and fuel but not oni air???
coz at ur intake manifold....got holes where ur injector sits.....
did i say anything wrong here????
hopefully not, and hopefully i didnt make things more complicated.....
heehee......

prometium.....
everyone heard goin thru JPJ is a pain-in-the-ass now.....
but i dun really know....
there;s lots of ppl in zth who do the inspection themselves...
n save quite a heafty amount of money compared to using runner....
some even managed to endorse 1.8GSR into a 1.3chassis......
so...the choice is yours....
ppl with $$$ hav the right to b lazy...
whereas ppl without $$$ hav to take more initiative....
just my own opinion la...heehee