adjustable screw camber

[20V Quard Cam]

for seg,hw much for the item above?
is it a must 2 install adjustable screw camber if i lowered my car?
heard tat de spring can b burned to lower a car,is it ok?safe?

 

[hitz]

Better use sport spring to lowered ur car lar.. Burn spring not so good..

 

[cYBorG]

it could be around rm20-40 per piece bro!!

 

[20V Quard Cam]

where can i get it?
must install if i lower my car?

 

[Dayline668]

Go any tayar shop also can fix it..

 

[Maxx]

screw camber can get less than RM10/pc. can get at sparepart shop.
but have to make sure ngam with ur absorber/arm.
tyre shop usually charge RM40-60 2pcs screw + install n adjust.

last time i asked if bring own screw, install+adjust rm15/pcs.

lowering car might have to adjust the camber coz all the camber setting will "out".

 

[g10]

there are a few sizes (diameter of the screw). normally under RM40 cannot stand pressure and easy to bend and the diameter is small. try to find a bigger and stronger one. usually between RM80 should be ok

 

[shazmi3]

there are a few sizes (diameter of the screw). normally under RM40 cannot stand pressure and easy to bend and the diameter is small. try to find a bigger and stronger one. usually between RM80 should be ok

RM80 for camber nut? max also i found until today RM40...yeap buy at sparepart shop is cheaper than tyre shop...

 

[Maxx]

em. how to get bigger 1 as it will not fit the screw hole.
and i think its rarely for camber screw to bend.

usually shops will use this excuse to ask owner to change new camber screw.