B16A turbo kit for sale

[DRacing]

B16A turbo kit for sale (value buy)

To all zth B-serious members....:
I have a complete set of B serious stage 1 (0.6 bar) turbo kit for sale :
This kit include ........
(1) custom made stainless steel exhaust manifold
(2) TD-05 twin blade Evo 3 turbo
(3) front mount intercooler
(4) full set stainless steel intercooler piping
(5) blow off valve
(6) silicone hose for intercooler piping
(7) HKS powerflow air filter
(8) 4 x 450cc injectors
(9) boost cut device
(10) fuel enhancer device
(11) stainless steel braided engine oil supply and return hose
(12) installation

Total cost is RM 8,800.00
Proven increase hp and torque.

Can up boost to 0.8 bar with a thick metal head gasket.

 

[TM01]

hi,i m interested.....whr loct?still can neg r?/??
got hp?

 

[DRacing]

B16A turbo kit for sale (value buy)

hi,i m interested.....whr loct?still can neg r?/??
got hp?

Hi bro , my location ia at Kepong . Price still can nego and garantee do it until you satisfy , is a proven product quality satisficion.....my h/p is 012-3963348......

 

[akuma]

need 2 know further....dis is a used kit or a custom kit comprising of used parts?of course no way d part r new 4 RM8.8K,rite?
"Proven increase hp and torque."--->i assume u haf cars fitted w dis kit 2 claim dis?care 2 disclose d power n torque figure?thk u.
+ installation?hmmm....wat abt engine management?d stk ECU can take d boost?basically no need 2 redo d engine,rite?dis is a plug&play kit?

 

[DRacing]

Bro akuma....this is a custom kit for B16A engine , and we do provide products warranty on our kit...and we had fitted a lot to my customers car , will show you the dyno asap . we will use back the stock ecu with our management system to work together with this turbo kit....of course we dun need to rebuild the internal of the engine with 0.6 bar running on the road....actually most of my customers run above 0.6 bar....with stock internal....This is where i dare to proof to all my customers..

by the way , the boost cut device and fuel enhancer device is brand new , this is the management tht works together with the stock ecu for turbo charge...

 

[TM01]

my is b18c enjin......so can do ?can pm me best price?

 

[ace79]

bro, would appreciate to see some dyno tests. 0.8 bar with stock internals is quite scary lehh...a noob question : this turo kit is meant for pickup or top speed? warranty - wise? what i know is : if the oil return line is not properly done, then the turbo can blow, and with any turbo cars, without your turbo, u can't run your car, right?

 

[akuma]

DRacing,
ur reply w d warranty statement is very assuring....cool.....whc part of kepong r u in?whc garage is dis?but ace79 has a very good point der....0.8bar w stock internals?a fren of mine w a full HKS turbo kit only dare 2 run 0.8bar w very thick gasket.....B16A=hi comp engine....hi comp n turbo dun jive,right?

 

[DRacing]

Bro TM01...to me is all the same either B16A or B18C....so dun worry....regarding best price , the best is we meet up and discuss...no obigation......thanks..

 

[DRacing]

Bro ace79 , in this day , everything is possible....as wat i bring out in the first post , 0.8 bar with a thick metal gasket , and with our kit , the oil supply and return hose are stainless steel braided , so no problem and hassle free . on warranty side , we bare on our product like out of sudden the turbo white smoke or injectors not function well and so on so on , but if u overrev until engine blow that 1 sure on your cost la....in fact is depend on what things had happen , and if u think this turbo is too lack we will exchange 1 for you with FOC , that's wat i say quality satisfaction....

 

[DRacing]

Bro akuma , some of your question i had answer with the earlier reply , so if i had miss out something very sorry , just give me a remind. My location is at Kepong , Industrian Taman Ehsan , garage is Drager Racing....if free dun mind to drop by and have a chat to know more on the turbo kit...no obligation.Thanks

 

[TM01]

Bro TM01...to me is all the same either B16A or B18C....so dun worry....regarding best price , the best is we meet up and discuss...no obigation......thanks..

i c my enjin block gasget there part got oil leacking......so......
if my enjin not in good health.........still can put turbo kit?or repair 1st?yr shop got repair?and i just buy 1 set b18c r cam,valve,retainer,can install together?thanks n pls reply me...
if can....i m thinking yr workshop to do.....how long insatll turbokit?

 

[DRacing]

Bro TM01 , for the engine block gasket , i need to see how bad is the condition , and b4 install the turbo kit , i will check thru everything together with you. Since u have bought the set of b18c r kit , install it together with the turbo kit to perform optimum power , we major do repair and upgarde , all the installation(together with b18c r kit) plus setting less than 1 week....(pls bare in mind , a perfect setting doesn't mean need to take a very long period to set) , so just a week is more than enough for me , dun worry....

 

[TM01]

so.......tht turbo kit all parts izzit new 1?or use parts renew?haha....i m so many question.
do u do mordify b20b?like other workshop got a stage 1,2,n 3!??!!??can give me idea?cause i like turbo,also like vtec.........
but scare turbo have to take more care to the enjin,n.a can long life n tahan........so hate la.......how?give me idea pls...thanks yr reply.

 

[kRiminaLz]

so.......tht turbo kit all parts izzit new 1?or use parts renew?haha....i m so many question.
do u do mordify b20b?like other workshop got a stage 1,2,n 3!??!!??can give me idea?cause i like turbo,also like vtec.........
but scare turbo have to take more care to the enjin,n.a can long life n tahan........so hate la.......how?give me idea pls...thanks yr reply.

better put a thread in the force induction section...
so many plp there that can help...
better..... can get more info...

 

[DRacing]

Bro TM01...the turbo kit is used part renew...but dun worry , TD-05 turbine can last very long , we do have the stage 1 , 2 and 3 , but advacable is start from beginning . If possible try to meet up together so can get the clearer picture on the turbo kit cars and if got the chance can test drive our turbo kit car...

 

[ace79]

bro, no - obligation meet, talk and test drive ke? VTEC still function or not? i am very much interested, but it'll take me around almost a year to save up that much of cash lah..can ah?

 

[DRacing]

Bro ace79 , it's really no obligation to meet up and share the experience and idea or even test drive on our kit...but must let me know earlier la cause finish work quite late , and our VTEC is fully function with a PowerSport Vtec Controller to let the turbo kick in together with turbo full boost. Bro we do accept credit card ma , so can installment thru your bank card la (just jocking , seriously no obligation)....Hope to see you soon...Thanks

 

[jzhost]

very serious buyer here... tried to call you but cant get thru. any others phone no. like house phone???

 

[DRacing]

Wei Wei Wei MR jzhost....dun disturb la....kacau kacau saja.....hehe...