Clutch Bearings

[epj7900]

Hello people,

I would just like to get some advice.

I have a HKS Twin Plate Racing Clutch and my bearing are busted.

I need to buy the replacements and I need to know where I can get them and how to get them.

Is it possible for me to get them from the chop shop ?

Thanks in advance sifus, ;)

 

[jinkl]

take the sample bearing to sparepart shop
they can order it from NTN ot NSK

 

[amad108..]

right.. try what jinkl said...

 

[epj7900]

take the sample bearing to sparepart shop
they can order it from NTN ot NSK

Hey Jin,

I need a suggestion. The Twin Plate was bought from SS Racing. Those donkeys gave the smaller bearing - which is the EVO 3 original Bearings. Now I need to find the original bearing. Any idea where I can get it.

Another thing I realised is that the Flywheel plate got makan a little. I suppose due to pressure. You know the black colour plate just where the bearing sits.

I need a suggestion. HKS plates can be dismantled and the plate can be taken out. Can I sent it for engineering may be welding shop n ask them to add metal to it ? The plate is not gone but worn a little. Too much pressure can break it.

As for the bearing - I do not have sample. So I am not able to seek for NTN bearings. Any idea on how it can be solved.

FYI - My car is out. Feels much lighter. The throttle response is now better - As I have reduced weight at the balance shaft, 4 wd gear and engine balancing. I am running at low boost waiting for the engine to run in. Later will test but the clutch is std. I doubt can test with that - just too much of slipping.

Thanks in advance for all your opinions.

Cheers.

 

[jinkl]

aiyak kinda confused
not very sure la bro about the bearing
aiseh 2nd hand stuff susah to say la bro

 

[Joeker]

Just tell the spare part shop you want throw out bearing for your gearbox's clutch. Throw out bearing are model specific items, you can;t mix and match with other gearbox model.

Flywheel plate? black color? are you refering to the Clutch housing's pressure plate.

If so, NO. You can't add metal to them pressure plate.

 

[jinkl-]

wah u mean the middle fingers eaten up ? ops then sure cenot redi bro