Differences 20G n 16G

[mobb]

Can anybody tell me the differences between TD05 20G and 16G?? the good and bad about it..and does anybody have the pic between does 2 turbine..TQ All!

 

[LyPaN]

http://web.telia.com/~u58304000/turbo3/mitsubishi/mitsubishi.htm

 

[EVOFans]

20G is a TD06 wheel.16G is stock EVO turbo.Stock EVO turbo make ~420whp(Very high boost,over 2 bar) while 20G can make 500 or so.But both of them is weak after 7.5k or so.

 

[jinkl]

EVOFans , nah bro , u got it abit wrong
sorry if im wrong , u can see this

http://www.ztechz.net/sitebuildercontent/sitebuilderpictures/td05h-16gsmall-cfm.gif
http://www.ztechz.net/sitebuildercontent/sitebuilderpictures/td06h-20g-cfm.gif

above 2.0bar , u will loose performance n not gain anymore
both td05 and td06 has its max cfm at lower PR
those are the compressor flow map :)
it looses it efficiency above 1.6bar i guess which means
boosting higher than that bring no extra performance
td05 max at 550cfm while the td06 at 640cfm
420whp on stock evo turbines i dnt think can be achieved

 

[mobb]

owh..so no big diff between this two turbine. so better just use the stock turbo then modi it to use the 20G fin..that muc cheaper rite guys??

20G is a TD06 wheel.16G is stock EVO turbo.Stock EVO turbo make ~420whp(Very high boost,over 2 bar) while 20G can make 500 or so.But both of them is weak after 7.5k or so.

 

[bebolagalas T]

yo bro..our senior jinkl is rite...if yall want hi boost spent ur money on bebolagalas turbo

 

[khoyos]

20G is a TD06 wheel.16G is stock EVO turbo.Stock EVO turbo make ~420whp(Very high boost,over 2 bar) while 20G can make 500 or so.But both of them is weak after 7.5k or so.

looks like a lot of foreign forum readings instead of actual experience...

 

[kRiminaLz]

20G is a TD06 wheel.16G is stock EVO turbo.Stock EVO turbo make ~420whp(Very high boost,over 2 bar) while 20G can make 500 or so.But both of them is weak after 7.5k or so.

16g max output is around 350, while 20g is around 450++...

Evo fans,
that 2bar boost is achievable with the 20g, n possible to get the desired hp's, but a few extra mods needs to be done especially to the fueling, management, cams and mainly the turbo (port the housing n stuffs)...
but i still dont think its efficient, refer to Jin's attachment.
after porting, for an Evo/vr4,1.8b is possible, but 2br? naaa....