DIY on cars?? post in your Q?

[speed2horizon]

Bro, I'm really interested in doing a ECU rechipping myself. ECU is from GER Libero GT.

 

[hanslin]

Bro, I'm really interested in doing a ECU rechipping myself. ECU is from GER Libero GT.

Dear speed2horizon, sorry that i cant help u with this!

Please let the expert handle it, before rechipping u need to make sure the mapping in the chip is suitable for your ride! If the a/r to lean also will make your ride faster, faster to go in workshop! Best is to dyno it after rechipping. :rolleyes:

 

[alantjw]

bros and Sifus sekalian.. i wan ask how to take out my car dash board??? im driving a 5th gen celica... any pics will be helpfull.. like locations of all the screws and clips would also help alot..

 

[joequah]

Hi.. I wan to install alarm system for my yr95 kancil.
This is the alarm that I want to fix in.

Punch II Pro Serial Car Alarm System 4043M

Main Features:
1. Lock & Unlock
2. Door Open Signal Lamp
3. Reset Button
4. Auto Rearming
5. Leaning Code
6. Mute Arming
7. Impact Memory
8.Brake Lock

And I uploaded the wiring diagram.


I heard that there is the alarm things on the passenger side box bottom. I tried to see but nothing. Just a few unplug wire over there.

The wire is not one by one. Few a them are connected to the white things and another few connect to the other white thing(you can see it often, that they connect all wire together) . And thats it.

There was an alarm system installed before. So maybe they took it off and i think mostly the wire was for the alarm(maybe).

So how to start ? Is it difficult ? Pls help. Thanks

 

[wsonny]

I would like to paint my kancil bonet into matt black. Can you giv me some guide wat should i prepare before DIY. and i got alot of stone chip on it, so need to apply clay before spray (izzit call clay for those need to smooth the surface)

 

[Omnipotent]

wow...nice thread...maybe i can get help here...my perdana aircon console lights all died...i wanna replace them...can teach me the step by step (i.e how to remove panel, replace lights, etc.)?

Thanks alot!

 

[unionjack_82]

how to diy install atf cooleer?can help??...my car is kia spectra

 

[subaruimpreza81]

1- bro, how to tap air fuel ratio meter to kelisa 850cc with philipine Ecu??

2- Can teach me how to install Afc single button to kelisa 850cc??

thankz

 

[nieerz]

how to install dashboard lancer to my ride satria with diy .. if have a pic ..

 

[hanslin]

:wavey::wavey::wavey: sorry to said, i'm to buzzzzzzzzzzzzy for a moment to setup a workshop!!!. But I'll reply the QQQQQQ as soon as possible...

 

[^pomen_GTR^]

*any other solution apart from changing whole meter set for auto tranny wira/satria??

-since the odomoter/tripmeter died....(while speedo still working fine)

*the main suspect was that plastic internal gear that connect the speedo to odometer....is there any replacement available for that gear??because planning to change it (DIY)

 

[carneo]

HI I would like to now how to change the illuminated light bulb for proton persona aircond knob and the auto gear knob, how to find srew or hiddend hook to remove the center console.

 

[Tuanku.J]

hi ,

1) how to install after market fuel pressure regulator in campro engine, what need to be buy and how ?
2) what is the purpose of having oil catch tank?..is it ok just to have small filter in the head cover ?

 

[Lantaroz]

hye all..i wanna ask question..how to diy wiring foglight? i really2 stupid about wiring:stupid:

 

[t0jal428]

hallo..need advice..can i m0ve my megaraizen vs fr0m ngine ro0m to inside(dashboard area)...or buy other voltmeter?

 

[shondown]

hi all... nice thread...

I recently found that some guys at PPEOC had their keyring mod so it will glow when the door is opened (like the ones in Waja).He also made it so that it'll auto-dimm.

I had zero XP in DIY, so how do can i do this?

 

[feipepe]

bro hanslin,
want to ask where is the place can buy the spring holder? i had try to find at spare part shop, see a lot of spare part dun have sold this item.

 

[Tatsumaki]

Bang Haslin, aku mau DIY my wira headlamp become smoke eye like those girls punya eyes, but how to remove it? some people told me that I have to remove both bumper dan grill, but I don't know how to take away the bumper.

So any lobang or any ways you can tell me how to remove the bumper? It's nice if you have some pic =) and also how to separate between the wira headlamp plastic dan cermin dia?

Thanks in advance, bro!