Dyno Tune...

[mugen9]

waa...ok la got few friends which 'ngam' with Jacky...can go by group laa to
Amoil...anybody wanna recommend us to Jacky...u know laa..sometimes workshop need to recommend to get better service...hehe

i also heard few things about Speedworks...but me myself never experience..

my engine just been rebuilt..need to running in first for the first 5k km...

anybody wanna join group dyno to Amoil? :regular_smile: :shades_smile:

Who has Jacky's h/p no??

tqvm

 

[hattech-v]

jackie never pickup unknown number... but u can give try first.. :)
mugenR, normally dyno tuning will take about an hour+..
if u want to set the cam using cam dial it will take another extra long time.. if just wanna set the adj campulley u can set it during the dyno tuning session all together...

 

[Enthusiast]

As i know dyno tuning with a piggyback tricks the ori ecu to supply more fuel and air to the engine to compensate for the additional mods like cams injectors exhaust and stuff.....as without tuning ur car would underperform no matter how much parts u throw in....

but wat if my car already has a mugen chip inside....and im gonna install an safc2 and dyno tune it....the diff wouldn't be that much anymore right? since the mugen chip itself made the car supply more fuel n stuff........

anybody who has installed an safc2 in their car? mind to shard how much u gained after tuning it?

 

[hattech-v]

the safc will only perform like a piggyback if u already using the mugen chip...
the same concept apply.. its for correction...
the other way u can go, get the mugen chip's base map n copy it to blank chip n fine tune it.. then put the new chip in ur ecu...

 

[MugenR]

Thanks for the info bro, they'll charge RM 150 for dyno right, will they charge for cam pulley adjustment too?
Or is it all included ? And how much roughly will they charge for setting the cam with cam dial?

Am bringing the car down for re-tuning. Thanks again for the info bro.

jackie never pickup unknown number... but u can give try first.. :)
mugenR, normally dyno tuning will take about an hour+..
if u want to set the cam using cam dial it will take another extra long time.. if just wanna set the adj campulley u can set it during the dyno tuning session all together...

 

[hattech-v]

not sure how much... if u have a good negotiation skill, u might get the price cheaper than others.. :)

 

[MugenR]

Do we need appointments with him, or just drop by and he will do the job, because i'm planning a one day trip over there.

 

[hattech-v]

if u coming fr outside kl, better make appoinment first...

 

[mugen9]

one more thing...only Jacky who's doing the dyno tuning isn't it??

i'm afraid if Jacky is unavailable,some smart Alex ( one of the foreman ) going to operate the dyno and ruin everything....

normally,what do they check ( our car ) before they do the dyno tune??

tq