Flywheel That Could Fit Campro CFE Crankshaft??

[mason_computer]

Hi! I am planning to replace my Campro engine crankshaft with the CFE crankshaft. Any idea where I could find a flywheel that could fit the CFE crank since its 6 bolts rather than 5 bolts?

Thanks!

 

[stupidcar]

Hey. Does the CFE Crankshaft lower the compression? Or is it just the pistons?
Why u use it?

 

[mason_computer]

Its forged and its alot stronger compared to the stock campro crank. I think there are many horror stories online regarding the stock crank snapping.

http://ubai.my/ubai-fullpage-mudah-my-campro-halfcut/proton-campro-crankshaft-broken-issue-defect-or-coincidence.html

Cause I am going to turbocharge my car thats why I don't feel safe with the stock crank.

 

[vr2turbo]

Hey. Does the CFE Crankshaft lower the compression? Or is it just the pistons?
Why u use it?

Some crank will change the displacement with longer stroke, however compression is the piston.

 

[^pomen_GTR^]

if not mistaken cfe crank is a tiny bit shorter stroke than normal campro...and i think they changed the design a little bit and perhaps better tooling tolerance as well...


i think for 6bolt flywheel maybe can try check from other mitsubishi gen2 engine (engine terbalik type)....or even maybe can try compare with 4g1x series flywheel first....

 

[stupidcar]

Its forged and its alot stronger compared to the stock campro crank. I think there are many horror stories online regarding the stock crank snapping.

http://ubai.my/ubai-fullpage-mudah-my-campro-halfcut/proton-campro-crankshaft-broken-issue-defect-or-coincidence.html

Cause I am going to turbocharge my car thats why I don't feel safe with the stock crank.

Yeah I heard about the crankshaft problem.
Do update here man.

 

[LittleWhiteWagon]

Hi! I am planning to replace my Campro engine crankshaft with the CFE crankshaft. Any idea where I could find a flywheel that could fit the CFE crank since its 6 bolts rather than 5 bolts?

Thanks!

Perhaps you can try getting a CJ4A mivec flywheel? From what I remember those are 6 bolt. Johor should have some lying around in chopshops.

How come you decided to choose a CFE crank over a waja crank? Just curious haha.

 

[stupidcar]

Perhaps you can try getting a CJ4A mivec flywheel? From what I remember those are 6 bolt. Johor should have some lying around in chopshops.

How come you decided to choose a CFE crank over a waja crank? Just curious haha.

Its forged, Pope Wagon.

 

[peterj]

Its forged, Pope Wagon.

forged but 2 mm shorter in stroke... if conrod and piston stay stock... it will become low com set up like those who use thick head gasket

---------- Post added at 04:32 PM ---------- 6 hour anti-bump limit - Previous post was at 04:29 PM ----------

PROTON CAMPRO 1.6 CFE ENGINE - KERETA DOT INFO

read it

 

[stupidcar]

forged but 2 mm shorter in stroke... if conrod and piston stay stock... it will become low com set up like those who use thick head gasket

---------- Post added at 04:32 PM ---------- 6 hour anti-bump limit - Previous post was at 04:29 PM ----------

PROTON CAMPRO 1.6 CFE ENGINE - KERETA DOT INFO

read it

Yes. Thats why we ask why in the previous posts bro.