Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="NoTiGuY" data-source="post: 845356" data-attributes="member: 245">dude, dont think there's a GR Pro..... only GD Pro and GD Max.from HKS website:-HKS GD Max------------The HKS GD Clutch Max is the latest evolution of the HKS multi-plate clutch series. The GD Clutch Max features the same multi-plate design and lightweight flywheel of the GD Clutch Pro, but also features a sprung hub (on most applications) and special engagement springs (patent pending). The sprung hub absorbs engine torque which helps increase the life of the transmission, and aids in decreasing gear noise. The engagement springs are placed between two pressure plates and the center plate. --- They force the clutch plates to engage one at a time. Doing so makes it easier to slip the clutch, improving street drivability and clutch control.The HKS multi-plate performance clutch kits are vehicle specific Pull-Type racing clutch applications designed for street-car use. The multiple plate design allows increased friction area and direct power transfer, thus offering greater horsepower and torque holding capacity and light clutch pedal pressure for easier clutch pedal management. The use of rivet-less clutch disks allow for better durability, increased friction area and direct torque transfer, while maintaining a friction material that is both wear and heat resistant. Each multi-plate clutch kit comes with a lightweight chrome-moly flywheel optimizes durability and high performance. The use of very durable and lightweight chrome-moly material with a steel tooth ring makes it possible to construct a thinner flywheel without sacrificing integrity. The concept behind a lightweight flywheel stems from the desire to enhance low-rpm throttle response on high RPM horsepower applications. With the lightened flywheel in the HKS Twin and Triple Plate Clutch kits, a quick rise in RPM can be attained from light throttle input for easier RPM matching when downshifting and to counter low torque at low RPM levels. Though the main focus of the HKS multi-plate clutch kits is on ultimate power transfer and engine response, a stable idle and smooth driveability is still maintained. Each HKS Twin and Triple Plate Clutch kit is a complete vehicle specific assembly that allows for a bolt-on installation. Some applications have an available slave cylinder rod that increases travel for enhanced pedal modulation.HKS GD Pro--------------A key component delivering engine power to the drivetrain is the clutch. On highly tuned vehicles the stock clutch quickly becomes obsolete because it does not have the friction material nor pressure to hold and transfer the additional power. Therefore a high performance clutch is needed to support and deliver all the engine power to the cars wheels. From using the T-002 and R33 DRAG GT-R to develop, test, and research the technology and dynamics of power transfer, HKS has created the HKS Twin and Triple Plate Clutch kits to surpass the demands of a high performance clutch. Twin Plate Clutch kits are designed for 700hp street use applications and the Triple Plate Clutches can handle over 1000HP, which are designed for drag racing applications.The HKS multi-plate performance clutch kits are vehicle specific Pull-Type racing clutch applications designed for street-car use. The multiple plate design allows increased friction area and direct power transfer, thus offering greater horsepower and torque holding capacity and light clutch pedal pressure for easier clutch pedal management. The use of rivet-less clutch disks allow for better durability, increased friction area and direct torque transfer, while maintaining a friction material that is both wear and heat resistant. Each multi-plate clutch kit comes with a lightweight chrome-moly flywheel optimizes durability and high performance. The use of very durable and lightweight chrome-moly material with a steel tooth ring makes it possible to construct a thinner flywheel without sacrificing integrity. The concept behind a lightweight flywheel stems from the desire to enhance low-rpm throttle response on high RPM horsepower applications. With the lightened flywheel in the HKS Twin and Triple Plate Clutch kits, a quick rise in RPM can be attained from light throttle input for easier RPM matching when downshifting and to counter low torque at low RPM levels. Though the main focus of the HKS multi-plate clutch kits is on ultimate power transfer and engine response, a stable idle and smooth driveability is still maintained. Each HKS Twin and Triple Plate Clutch kit is a complete vehicle specific assembly that allows for a bolt-on installation. Some applications have an available slave cylinder rod that increases travel for enhanced pedal modulation.</blockquote>

Verification

The Marketplace Latest

MITSUBISHI / FE658 (RB/BK S2S)
- Started by PIstonHeads
- Chassis and Wheels
Perodua Alza gear up body kit
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
Honda city Mugen gtwing spoiler
- Started by jeff6126
- Exterior and Body
Honda Civic FD JSracing GTwing spoiler
- Started by jeff6126
- Exterior and Body
Honda civic FC varis GTwing spoiler
- Started by jeff6126
- Exterior and Body
JSracing GTwing spoiler
- Started by jeff6126
- Exterior and Body
Proton saga drive68 bodykit
- Started by jeff6126
- Exterior and Body
Perodua Bezza projectR body kit
- Started by jeff6126
- Exterior and Body
Honda city gm6 drive68 body kit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Advise for mild mods

Hi

For Evo 7 , meant for daily drive
Just need to add a little more power
Target reliable 320bhp only. ..need generous torque at mid range RPM.

What item & mod should I do ?

Thanks

Sepang Track Day 24th May

Had a blast yesterday at Sepang... sadly only saw 2 rotaries there :(

My Flying Circus and a sweet Mazda Speed RX-8 ^^...

can sumome help me with the tachometer?

i just bought corolla levin ae101 a few days ago and planning to put a tachometer in it.can someone teach me or give me a link about how to put it in your car..plzz..:cool:

Search

Enjoying Zerotohundred?

Log-in for an ad-less experience

Reply to thread

The Marketplace Latest

MITSUBISHI / FE658 (RB/BK S2S)

Perodua Alza gear up body kit

brake caliper spray

Honda city Mugen gtwing spoiler

Honda Civic FD JSracing GTwing spoiler

Honda civic FC varis GTwing spoiler

JSracing GTwing spoiler

Proton saga drive68 bodykit

Perodua Bezza projectR body kit

Honda city gm6 drive68 body kit

Posts refresh every 5 minutes

Recent Posts

Recommendation: Turbocharger for 4B11 N.A engine

2026 Vios HEV launched with Local Battery Assembly - UMW Toyota Motor

SPPF: The Future of Automotive Surface Protection - A Technical Overview

Upping Wira 1.5 MMC performance

Volvo Malaysia Launches Locally Assembled ES90 Electric Sedan

Search

Online now

Enjoying Zerotohundred?