How to replace Gen2 (front) logo

[chl2080]

dear members,

I have dismantle the original Gen2 logo (front), but unable to fit back the after market logo. after dismantle the logo, in the centre there is a screw, which is originally use to secure the logo. however, it too loose for me to screw it back.

Any tip / feedback is appreciated. Tq.

 

[loose_end]

dear members,

I have dismantle the original Gen2 logo (front), but unable to fit back the after market logo. after dismantle the logo, in the centre there is a screw, which is originally use to secure the logo. however, it too loose for me to screw it back.

Any tip / feedback is appreciated. Tq.

Hello..May I know how does the after market logo look like..from what i know , when you dismantle the orginal gen2 logo..there is a somesort of like casing or shape that secure the original logo ya..Therefore , front what i understand..not sure whether izzit right..try getting a better skru or maybe a longer skru..

 

[chl2080]

Loosend,

if you see carefully, our logo is constructed like a "box"; casing to hold the top (the logo), the latter is a plactic cover which could be removed from the "base". The based is fix to the front grill.

As for the screw, its a built-in into the casing, you can only see it after removing the top logo. we r suppose to screw the top into to screw to secure it tightly.

The issue: the screw is short & moving - any idea how to do it?

TQ

Bump: Loosend,

if you see carefully, our logo is constructed like a "box"; casing to hold the top (the logo), the latter is a plactic cover which could be removed from the "base". The based is fix to the front grill.

As for the screw, its a built-in into the casing, you can only see it after removing the top logo. we r suppose to screw the top into to screw to secure it tightly.

The issue: the screw is short & moving - any idea how to do it?

TQ

Bump: Loosend,

if you see carefully, our logo is constructed like a "box"; casing to hold the top (the logo), the latter is a plactic cover which could be removed from the "base". The based is fix to the front grill.

As for the screw, its a built-in into the casing, you can only see it after removing the top logo. we r suppose to screw the top into to screw to secure it tightly.

The issue: the screw is short & moving - any idea how to do it?

TQ

 

[loose_end]

Loosend,

if you see carefully, our logo is constructed like a "box"; casing to hold the top (the logo), the latter is a plactic cover which could be removed from the "base". The based is fix to the front grill.

As for the screw, its a built-in into the casing, you can only see it after removing the top logo. we r suppose to screw the top into to screw to secure it tightly.

The issue: the screw is short & moving - any idea how to do it?

TQ

Bump: Loosend,

if you see carefully, our logo is constructed like a "box"; casing to hold the top (the logo), the latter is a plactic cover which could be removed from the "base". The based is fix to the front grill.

As for the screw, its a built-in into the casing, you can only see it after removing the top logo. we r suppose to screw the top into to screw to secure it tightly.

The issue: the screw is short & moving - any idea how to do it?

TQ

Bump: Loosend,

if you see carefully, our logo is constructed like a "box"; casing to hold the top (the logo), the latter is a plactic cover which could be removed from the "base". The based is fix to the front grill.

As for the screw, its a built-in into the casing, you can only see it after removing the top logo. we r suppose to screw the top into to screw to secure it tightly.

The issue: the screw is short & moving - any idea how to do it?

TQ

Err , double sided tape ??..

 

[mivecmerah]

just change the front grill....

 

[loose_end]

Err , the aluminium one?