i wan to DIY cd player ....

[Racing_Rhythm]

i wan to FIX cd player myself ....

I would like to fix the cd player myself ...

i would like to get info and advice from sifu here ...
wat tools i need to ?
the wiring ?
and i duno how to remove the speaker in my door there ...
how to open tht cover ?

thx

 

[DarkAccoon]

tell me these details first


what car are you driving
what player are you planning to install
any previous setup before this


if pioneer player then i can sent you the wiring lar
( or better if you just get it from pioneer's website )

 

[Racing_Rhythm]

oh realli ?

so far , i m driving kelisa .
original player ..
different car hav different way ?
becos i hav 1 more mr2 at home , i wish diy myself also ...

can u sent me the wiring ?

[email protected]

thx a lot

 

[AXXeLL]

ahaha.. dude, reading from ur title, i thought u were building one urself...

ahahah all the best!

 

[Racing_Rhythm]

hehez..building 1 myself ? i hope to do so !! :tongue:

 

[Racing_Rhythm]

i found a subwoofer from my store room . tht was my dad taken out from his previousx2 benz ;yet , i dunno how is the wiring. pic below ...

tis type woofer ... 8"
http://img.photobucket.com/albums/v101/speedinnight/DSC01073.jpg

unknown metal
http://img.photobucket.com/albums/v101/speedinnight/DSC01070.jpg

some wire from the unknown metal ! wat is them ? where should i connect to ?
http://img.photobucket.com/albums/v101/speedinnight/DSC01071.jpg

here are 3 unknown wire from the woofer ....same Q as above!
http://img.photobucket.com/albums/v101/speedinnight/DSC01072.jpg

 

[cacin]

If I understand the question and pic properly, that looks like a powered/active sub. Meaning, you need to connect the sub to power, ground and speaker input as well. There might also be a remote turn on connection.

How many wires coming out from the sub (total)? Does your sub comes with a tweeter? if not, I assume there should be around 5 or 7 wires from the sub. Is this correct? By the way, how many physical subwoofer in the tube?

Regarding the unknown wire piece, it is actually a connecter or terminal. This can somehow be used to indicate positive and negative connection. Normally, bigger pins are +ve and smaller pins are -ve.



I would like to know more about the unknown metal pic. Is that some kind of cloth that has the wire circling it? Or is there actually something in there (inside the grey thing)?

 

[Racing_Rhythm]

totalli 5 wire come out from the sub ...
and got the tsweeter

how many physical subwoofer in the tube?

what is physical subwoofer
what is tube ?

sorry , a newbie here.

 

[Racing_Rhythm]

The unknown metal look like tis after i tear the 3m sticker out!
http://img.photobucket.com/albums/v101/speedinnight/DSC01074.jpg

 

[cacin]

totalli 5 wire come out from the sub ...
and got the tsweeter

how many physical subwoofer in the tube?

what is physical subwoofer
what is tube ?

sorry , a newbie here.

5 wire? Have tweeter also? On the sub?

What I actually mean is, how many subwoofer do you see in the big black cylinder thing.
Since it is cylindrycal, that's why I call it a tube. :D

refer here as a FYI

http://www.lelong.com.my/Auc/List/DetailStd.asp?ProductID=2172638



You might have one cylinder (tube) but there might be 2 woofer inside. That's why I asked. You confirm that the black thing (tube) has tweeter also? 5 wires only o. Like I said, I believe it's an active woofer. So, 1 wire is +ve(12V), 1 is -VE(ground), 1 is remote turn on, 1 is speaker +ve and 1 is speaker -ve. Can you take a pic near the wire at the black tube? BTW, how many tube do you have actually? I am suspecting that the grey thing was a coil (low pass crossover). But, why have 2 when/if you only have one tube?

 

[mivecmerah]

uiyo

waaaa.....axxel.........chicks picture from internet ha.......nice kan...

anyway.......maybe u should connect to organizer...wut they called it...with the light blink2!!!

 

[Racing_Rhythm]

i think dun hav tweeter la ... haha....
thn wat is the unknown metal ?

 

[cacin]

maybe it's a low pass (inductor) or a noise suppressor.

 

[Racing_Rhythm]

my sis warn me not to touch her kls ....too bad.
i hav to touch on my car alredi ...

the original harness not match wif new harness !
wat should i do ? cut it off and join into the new harness ?

 

[cacin]

What car is your car? What model/brand of Hu are you installing?
Original harness is from? New harness is from?

 

[Racing_Rhythm]

car - toyota mrs
new harness - pioneer p1y .....

many accessories ppl said need to cut off the original 1 ..

 

[cacin]

Yes, you need to cut the original one. But, do you have a manual that tells you what is the wire colour code for your car?

If you have, then ok la. If not, need to look in the net. I would like to advise you to use a connector when you cut the wire and want to put in the HU wiring harness. this is better than just cut and sambung like normal acc shop would do.

Have fun DIY :D

 

[Racing_Rhythm]

thx ...i got the wiring from net ...
i found 1 harness connection from ex-player from japan ...
i cut the wire from tht harness , thts mean i din cut my original wire ...hehez....

http://img.photobucket.com/albums/v101/speedinnight/DSC01157.jpg

diy myself ..so happi ....

 

[koolspyda]

car - toyota mrs
new harness - pioneer p1y .....

many accessories ppl said need to cut off the original 1 ..

dont trust some silly "so-called" local auto accesories shop.

harness connector to HU unit are generally the same for toyota/daihatsu cars.
I got mine from kancil. just minor 1 pin location change to enable the antenna.

DIY myselt too.

some local auto accesories shop damn lazy & want easy work.