If Wanna Mod Like R32 To These ~~~

[Legend_MaRS]

R32 GTR or GTS

GTR 34 Head
RB26DETT ( original )

how much it need ?

haha~~ jus reply me lah ~~

TQTQ

 

[sakuraguy]

Think on the engine side should be able to swap .. but upon requesting changing the face lift i think its quite hard and it wont match because of the chassis side and length is not same. Many custom works shud be done and could look more weird tho' later on.

R34 face sits firmly on R33 chassis due to the chassis design and the length ;)

There are custom kits available from www.Bee-R.com for skyline drift projects they running currently .. R324 and R334 drift project.

http://www.sutv.zaq.ne.jp/ryu2000/r32vsr34front.2.jpg
http://www.sutv.zaq.ne.jp/ryu2000/r32vsr34back.jpg

Below are the samples converted from R32 to R34 Face or called R324
http://www.bee-r.com/main/parts/aero/b324r2/080-078.jpg
http://www.bee-r.com/main/parts/aero/b324r2/1.jpg
http://www.bee-r.com/main/event/photo0503/112-001.jpg
http://www.bee-r.com/main/event/photofisco/118-007.jpg
http://www.bee-r.com/boss/d1/photo/pro-01.jpg
http://www.bee-r.com/main/news/photo/087-002.jpg
http://www.bee-r.com/main/news/file/003.jpg

Below are the samples converted from R33 to R34 Face or called R334
http://www.bee-r.com/main/parts/aero/b334r/092-006.jpg
http://www.bee-r.com/main/parts/aero/b334r/092-007.jpg
http://www.bee-r.com/main/parts/aero/b334r/106-013.jpg
http://www.bee-r.com/main/parts/aero/b334r/106-012.jpg

A weird R32 GT-R a.k.a R32ALFAGT-R
http://img.photobucket.com/albums/v62/maxxd/Fishous/Kevscar2.bmp


.. and lastly u might need less than RM50k for total conversion like above ;)

 

[[PIMPIN]]

its like AUD$10k drive in drive out at Bee-R when HPI went and asked.. so Msian is like RM30k but thats in Japan.. factor in shipping etc and costs starts to blow out when its landed in Msia

 

[SiGNAL]

10K for something weird, rather keep the 32 front end. <_<

 

[Legend_MaRS]

faint ~~~( fall down from the chair )~~

so expensive ~~

but ..thank you for u all ~~

 

[.S K A G E E.]

I reckon the problem when wanting to fit the GTR34 head on an R32 is not the lenght but more about the width. Even with the flared ( widebody) rear of the GTR32, you would need to widen the rear at least an 1 inch perside inorder to match the front of the GTR34; more if you are planning to us an R32 GTS as a base.

A GTR34 halfcut cost around RM25k-RM30k

 

[Edison_MRS]

u mean jus get a R34 head can fix in ??
half cut need 30k ~~~for others ppl ~~can buy a kelisa aredi ~~

so far ~~~ i jus wish to get a pair GTR34 original seat ~~to fix into mrs ~~~