Ignition Wire Colour

masvidal

Known Member
Senior Member
Joined
May 13, 2004
Messages
253
Points
3,018
Location
Kota Kinabalu
Ignition Wire Colour (Key Cylinder)

Im driving proton wira. can anyone guide me what colour for:-

- 12V wire
- ACC wire
- ON wire
- START wire

Thanks.
 
Last edited:
u use it properly won't go kaboom la
u juz wanna see which is the live wire
 
I can only remember that the 12V wire is the thickest white colour wan. As for ON, ACC n START, just trial and error lor. Won't spoil anything wan.
 
trex92 said:
I can only remember that the 12V wire is the thickest white colour wan. As for ON, ACC n START, just trial and error lor. Won't spoil anything wan.

ok. for the 12V, ON & ACC i know lah how to test. but, for the START wire how to do it? put the test light inside the wire socket and start the engine ah?
 
There should be 5 wires in total mah...

1) +12V
2) ACC
3) ON
4) Ignition+Fuel pump
5) Start

The +12V should be completely black. Touch that against wires 1,2,3,4 and your car will work like normal. Touch it to number 5 to crank the starter. 5 should be black + yellow or black + red. Just try la because once you touch +12V against the 'start' wire the engine will crank already.

To drive the car you only need to touch +12V to the wire number 4. Of course you won't get dashboard lights, air cond, radio, etc.etc. but you can still drive away.
 
cyclonite said:
There should be 5 wires in total mah...

1) +12V
2) ACC
3) ON
4) Ignition+Fuel pump
5) Start

The +12V should be completely black. Touch that against wires 1,2,3,4 and your car will work like normal. Touch it to number 5 to crank the starter. 5 should be black + yellow or black + red. Just try la because once you touch +12V against the 'start' wire the engine will crank already.

To drive the car you only need to touch +12V to the wire number 4. Of course you won't get dashboard lights, air cond, radio, etc.etc. but you can still drive away.


great...hehehe....bro, for turbo timer, which wire u need to connect to?

if using alarm, how to do the connection for the alarm to arm while the timer is counting down?
 

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience